Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: al brown on 27 October 2014, 20:57:40

Title: wanted: estate fuel pipe
Post by: al brown on 27 October 2014, 20:57:40

Hi all, as per title, I need the fuel pipe that goes into the fuel filter (from the tank to the filter). Not sure where the next break up to the tank is, but I have broken mine where it meets the filter.
Don't suppose it matters but it is for a pre facelift.
Cheers Al

Title: Re: wanted: estate fuel pipe
Post by: 05omegav6 on 28 October 2014, 10:52:46

Iso 7480 hose, as per... http://www.ebay.co.uk/itm/ISO7840-A1-MARINE-Grade-Rubber-Fuel-Hose-Petrol-Diesel-Type-7480-ISO-Breather-/250912389358

And two stainless jubilee clips either end :y

Title: Re: wanted: estate fuel pipe
Post by: al brown on 28 October 2014, 19:59:26

Cheers Al,

Don't happen to know what size so you? I did fit a short piece that I had in the garage as a temp measure till I could get the proper pipe but the internal diameter is slightly to big. Didn't measure what size I needed as I planned on getting a proper pipe.

Al

Title: Re: wanted: estate fuel pipe
Post by: 05omegav6 on 28 October 2014, 20:14:57

5 or 6mm I/D off the top of my head :y

Title: Re: wanted: estate fuel pipe
Post by: al brown on 28 October 2014, 21:41:47

Cheers, don't want to get under the car any more times than I need to. Plus it's dark when I get home from work and it's gonna rain. Oh, and I'm lazy too

Title: Re: wanted: estate fuel pipe
Post by: joff on 28 October 2014, 22:27:45

Quote from: al brown on 28 October 2014, 19:59:26

Cheers Al,

Don't happen to know what size so you? I did fit a short piece that I had in the garage as a temp measure till I could get the proper pipe but the internal diameter is slightly to big. Didn't measure what size I needed as I planned on getting a proper pipe.

Al

Check the inlet /outlet size on the filter

Title: Re: wanted: estate fuel pipe
Post by: 05omegav6 on 29 October 2014, 05:48:50

Quote from: joff on 28 October 2014, 22:27:45

Quote from: al brown on 28 October 2014, 19:59:26

Cheers Al,

Don't happen to know what size so you? I did fit a short piece that I had in the garage as a temp measure till I could get the proper pipe but the internal diameter is slightly to big. Didn't measure what size I needed as I planned on getting a proper pipe.

Al

Check the inlet /outlet size on the filter

Aim for a mm less and soak the hose in hot water prior to fitting :y