Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: PhilCavSRi130 on 09 November 2014, 13:35:30
-
Ive changed my 98 elite front seats for a set of FL MV6 leathers and now have the airbag light on the dash. When i took the seats out i found the wire for the drivers seat airbag had been repaired (bodged) so had the loom plug and wire off the donor car to do a proper repair but this hasnt resolved the light being on. Ive put "My Naff Code Reader" in and its giving me DTC 6 & 7 as the faults.......any ideas please?
TIA
-
Is your 1998 car PFL or MFL.
Codes are around the pretensioners (both sides), making me think that you car had the mechanical pretensioners, thus pre MFL.
-
Its a MFL as far as im aware. I wasnt aware there was a difference in the pretensioners?? So if i swap them from the original seats it should resolve my probs?
-
Its a MFL as far as im aware. ....
http://www.omegaowners.com/forum/index.php?topic=90440.0 ;) ;)
You'll need the airbag light resetting when you fix the 'fault' ....... it won't do it itself :(
-
Thanks for that its deffo a MFL looking at that. :y