Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: amba on 04 December 2014, 07:55:57
-
Throttle body wiring loom plug required for a 3.2 .( but suspect a 2.6 would be same :-\?)
Black plug that goes onto the throttle body and as much of the wiring as possible...mine has fallen apart and held inplace with "good luck and some cable ties" :-[
-
I've the same problem on mine.
I just pushed it into the hole :D and wiped a bit of "No Nails" across it as a temporary measure 18 months ago ::)
As long as the rubber is still there, it will do the job until you get the loom and or better weather comes ;)
-
Thats how mine is secured T.G.
Just would like at somepoint to get it fixed and have time on my hands now with work rundown looking to get minor things sorted. :y
-
Mine was stuck in by the Met plod with black sealant, been like that for some time now, I even have a 3.2 engine loom here in good order just can't find the time to do the job.
-
Looks like numerous Omegas are in similar situation with cheap/nasty plastic plugs.
Well still looking if anybody has a loom they dont need or are pulling a 3.2 or 2.6 apart. :)