Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: lucky biker on 07 December 2014, 15:34:29

Title: won't rev, lumpy tick over
Post by: lucky biker on 07 December 2014, 15:34:29

Hi, I have a 2.2dti, its hard to start and when it does, tick over is lumpy and when I try to rev it goes to about 2000rpm the engine management light comes on, no fault codes showing, I have replaced the injectors and cross overs but no change, please help.

Title: Re: won't rev, lumpy tick over
Post by: 4x4 on 07 December 2014, 15:45:12

Its gone into limp mode,could be cranksensor or maf,disconnect maf and see if that makes a difference.

Title: Re: won't rev, lumpy tick over
Post by: lucky biker on 07 December 2014, 15:48:22

Thanks but What and where is the maf ?

Title: Re: won't rev, lumpy tick over
Post by: tigers_gonads on 07 December 2014, 15:52:13

Its the plug / unit that sits between the Airbox and the throttle body

Title: Re: won't rev, lumpy tick over
Post by: lucky biker on 07 December 2014, 16:03:11

Thanks,  will give a go tomorrow and let you know what happens, am also planning to take it to the local diesel specialists to have the fault codes done live, to see if they can find anything,