Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: moggy on 09 December 2014, 18:49:16
-
Seasons felicitations to all.Think i know the answer,but does the passenger and drivers seat.Have separate fuses,as pass is lovey and hot,drivers flecking freezing.Both lights on console on,leather,omega elite 95.The wife said,put your thermals on you wimp. ;D :y.
-
I believe they are on separate fuses on the fronts (rears share same fuse), but dream on if you think its just a fuse ;)
-
I believe they are on separate fuses on the fronts (rears share same fuse), but dream on if you think its just a fuse ;)
Thanks TB,so the seat is flecked.Just my luck as its turning,a bit nippy up norf. ;D :y.But in my dream,if i change fuse.14,20,29,it might work. ::) ;D.
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
-
Is it possible,to move the front seats.To the back and the back seats to the front.That way i could take the cat,at least their.Would be one warm pussy,instead of the wife.BTW i int stupid,the wife never looks on our forum. ::) :) :).
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
Just reread,you mean the light,on the heated seat switch.What a idiot i am. :y.
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
I have absolutely no idea what your car is, other than your profile say "3.0l" ;)
-
Just checked the PFL schems as well. Basically the same as far as power feeds are concerned.
So if the orange light is on, and the other seat works fine, its either the controller (unlikely on PFL), wiring (possible) or element (likely).
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
I have absolutely no idea what your car is, other than your profile say "3.0l" ;)
TB,sorry to be a pain.Its a 3ltr 1995 Elite Auto.Saloon.Does that help.Dean :y
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
I have absolutely no idea what your car is, other than your profile say "3.0l" ;)
TB,sorry to be a pain.Its a 3ltr 1995 Elite Auto.Saloon.Does that help.Dean :y
See reply #8 for PFL cars.
If you're really, really lucky it'll be damaged wires under seat. But more likely the element.
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
I have absolutely no idea what your car is, other than your profile say "3.0l" ;)
TB,sorry to be a pain.Its a 3ltr 1995 Elite Auto.Saloon.Does that help.Dean :y
Take the seat out, remove the base cover (did I see a guide recently?), cos the damage is likely to be the base rather that the back and have a look. If the burnt bit is only just on the element you might be able to cut it out & resolder. If not, your wife's suggestion of Long Johns might be a good idea ::) ;)
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
I have absolutely no idea what your car is, other than your profile say "3.0l" ;)
TB,sorry to be a pain.Its a 3ltr 1995 Elite Auto.Saloon.Does that help.Dean :y
See reply #8 for PFL cars.
If you're really, really lucky it'll be damaged wires under seat. But more likely the element.
Thanks TB.I must admit i have moved the seat.About 6 or seven ,times in the last 2 weeks.Back and forward,to put the new stalk in.And check the fuses,also when hoovering.But if the element is gone,its gone.I will have a look over the weekend.Don't think i will bother,changing seats.What a nightmare,thanks for your advice.Kind Regards Dean. :y
-
It won't fix the seat any, but reread the penultimate line of the first post ::)
;D
-
It won't fix the seat any, but reread the penultimate line of the first post ::)
;D
as there are only two lines in the first post ............... ???
-
It won't fix the seat any, but reread the penultimate sentence of the first post ::)
;D
as there are only two lines in the first post ............... ???
Pedant :P
-
It won't fix the seat any, but reread the penultimate sentence of the first post ::)
;D
as there are only two lines in the first post ............... ???
Pedant :P
you meant the first line then ....... ;)
-
Just checked FL schems, if the dash indicator lights up, and one seat works but not other, it ain't the fuse. So save the bother of even looking ;)
TB is my car a FL then,as i thought it was a PFL.Also i have just changed the,indicator stalk any connection. :-\
I have absolutely no idea what your car is, other than your profile say "3.0l" ;)
TB,sorry to be a pain.Its a 3ltr 1995 Elite Auto.Saloon.Does that help.Dean :y
Take the seat out, remove the base cover (did I see a guide recently?), cos the damage is likely to be the base rather that the back and have a look. If the burnt bit is only just on the element you might be able to cut it out & resolder. If not, your wife's suggestion of Long Johns might be a good idea ::) ;)
Andy,you may be right.Apart from removing the seat,a nightmare i think.Both my wife and i,are ipc certified solderers.So would not present a problem.I was thinking of,wearing her tights.But i am worried about fluid,transfer. ::) ;D ;D :y.
-
That too ;D
-
Ok Andy,Al.Is this take the piss out of dean night. :) :) :).So now i know the seat is,lets say broken.Dean. ::) :y
-
Not at all :y was trying to highlight TBs skim reading prowess ;D
-
Well,at least his reply's were constructive. ::) ;D.Dean.
-
If you do take the seat out, bear in mind they're heavy. Not sure you need to worry about airbags & pretensioners on a 95 car though.
-
Not at all :y was trying to highlight TBs skim reading prowess ;D
Your lucky I'm awake, having a nasty cold that could potentially break out in deadly manful. So I missed the 95 bit. I blame it on poor punctuation by moggy, seeing as its pick on moggy day :P
On the upside, my bath is warm and soothing :)
-
Not at all :y was trying to highlight TBs skim reading prowess ;D
Your lucky I'm awake, having a nasty cold that could potentially break out in deadly manful. So I missed the 95 bit. I blame it on poor punctuation by moggy, seeing as its pick on moggy day :P
On the upside, my bath is warm and soothing :)
On the upside, my bath is warm and soothing :Unlike my ficking seat. ;D
-
;D