Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: amba on 09 January 2015, 16:22:03
-
Noticed that my front headlight washers had stopped working so had a look at the pump.Putting 12 volts across it motor still failed to work ,but in the store cupboard I had a spare so fitted it and all working again.
Question though...The water spray from 1 side seems to completly miss the headlight and goes straight up onto the bonnet. :o
Is it possible to alter the angle/direction of the spray jets like on the P/F/L models
-
yep with proper washer jet tool or chance your arm with a needle :y
-
Washer jet tool ? never seen one of them before.
On the screen jets I have always used a needle,but would like to see a proper tool for the job...piccie ??
-
Did google search ...and amazed such a bit of kit exists,but suppose garages must use something other than a needle. ;)
Will get 1 ordered ..thanks for heads up :y
-
Washer jet tool ? never seen one of them before.
On the screen jets I have always used a needle,but would like to see a proper tool for the job...piccie ??
google Sealey AK52206, costs about £5.
I have one(somewhere!), because it was cheaper than that and looked useful. I should know better.
Generally I just use a needle.
Also, it's probably a bit long to adjust headlight washers.
-
£10.74 inc VAT, bloody hell! :o
-
£10.74 inc VAT, bloody hell! :o
You need to look harder!
-
£5 seems fair ;) but £10 seems excessive >:( and would continue with the "needle "
On the search now...thanks guys :y
-
£10.74 inc VAT, bloody hell! :o
You need to look harder!
Must admit that i only looked on Sealeys. :-[