Omega Owners Forum
Chat Area => General Car Chat => Topic started by: EMD on 23 January 2015, 16:17:22
-
Has anyone got a recommended lpg installer to use ? Any price guide to a V6 :-\ Gas tank can be slung underneath , looking at a big tank , not sure of sizes but it will go under the boot on the truck :y
-
Or could possibly have a go at home fitment
lpg kit (http://www.ebay.co.uk/itm/STAG-300-6-AUTOGAS-SEQUENTIAL-INJECTION-LPG-6-CYLINDER-KIT-W-VALTEK-INJECTORS-/290803454725?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43b53c9305)
-
That evapourator would barely run a decent fiesta engine.
Yet another clear example of why egay should be avoided.
-
A stag kit, so familiar ground to plenty on here. :y
Not sure what current prices are like, but that strikes me a pricy for the front end bits only excluding any consumables, so you will need nozzles, hose and clips, all mounting and plumbing hardware, a programming cable, some polyflex hose to the rear, tank, valve and valve box, tank mounting hardware, filler and so on.
-
Is it Lazydocker that fits them :-\
-
Is it Lazydocker that fits them :-\
His contact no longer supplies stuff.
-
Is it Lazydocker that fits them :-\
His contact no longer supplies stuff.
Damn :(
-
Theres a place in corby that installs lpg and also finedon :y
-
Theres a place in corby that installs lpg and also finedon :y
Contacted the one in corby mate , no response and estimated cost from their website is between £1100-1400 i think :-\
-
Prins prices. From £1680/£2100 inc VAT depending on the system you go for. ;) So assuming Prins will be the most expensive, you can work downwards from there for a fully installed system. :)
http://www.prinsautogasuk.co.uk/conversion-price-list.php
-
Prins prices. From £1680/£2100 inc VAT depending on the system you go for. ;) So assuming Prins will be the most expensive, you can work downwards from there for a fully installed system. :)
http://www.prinsautogasuk.co.uk/conversion-price-list.php
And I'd be happy to pay a small premium for PRINS, as it is a better system
-
Prins prices. From £1680/£2100 inc VAT depending on the system you go for. ;) So assuming Prins will be the most expensive, you can work downwards from there for a fully installed system. :)
http://www.prinsautogasuk.co.uk/conversion-price-list.php
Thanks tig , quite a low warranty considering , is that valvecare worth the extra :-\
-
Mine has a Prins VSI system which was installed at 56000 ish miles and I've just taken her through 230,000 miles. 8) No valvecare on it either. ;)
Any problems I've had with it have been related to general engine problems such as coolant leaks, rather than the LPG system itself. :y
So I'd say it's a good advert for Prins! Maybe I should contact them and they'll give me a large cash reward! ::) ;D
-
Valvecare/flashlube is only required if the valves are too hard in the head. GM V6 doesn't need it.
-
Not a gm engine but isuzu ;D
-
Not a gm engine but isuzu ;D
Indeed... The only common factors with the Omega V6 are the badge and the fuel :D
-
Or could possibly have a go at home fitment
lpg kit (http://www.ebay.co.uk/itm/STAG-300-6-AUTOGAS-SEQUENTIAL-INJECTION-LPG-6-CYLINDER-KIT-W-VALTEK-INJECTORS-/290803454725?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43b53c9305)
Need a tank.
Thought you'd brought :-(mighty)4x4 not a gas truck
-
Or could possibly have a go at home fitment
lpg kit (http://www.ebay.co.uk/itm/STAG-300-6-AUTOGAS-SEQUENTIAL-INJECTION-LPG-6-CYLINDER-KIT-W-VALTEK-INJECTORS-/290803454725?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43b53c9305)
Need a tank.
Thought you'd brought :-(mighty)4x4 not a gas truck
When i come down to hoof land ill give you a shot in it ::)
-
Or could possibly have a go at home fitment
lpg kit (http://www.ebay.co.uk/itm/STAG-300-6-AUTOGAS-SEQUENTIAL-INJECTION-LPG-6-CYLINDER-KIT-W-VALTEK-INJECTORS-/290803454725?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43b53c9305)
Need a tank.
Thought you'd brought :-(mighty)4x4 not a gas truck
When i come down to hoof land ill give you a shot in it ::)
That sounds remarkably like Stemo talk... :D