Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: GastronomicKleptomaniac on 03 April 2015, 07:19:51

Title: Brown wire, NS bank?
Post by: GastronomicKleptomaniac on 03 April 2015, 07:19:51

While fannying on swapping coil packs yesterday, I found a broken brown wire - was coming out of the wiring harness immediately next to the 246 coil pack plug... Only very thin and was broken - any ideas? Will try to get a pic later...

Title: Re: Brown wire, NS bank?
Post by: 05omegav6 on 03 April 2015, 10:16:50

Have a good read of Bigtimes engine loom thread including linked threads and all will be revealed :y

Title: Re: Brown wire, NS bank?
Post by: Steve B on 03 April 2015, 16:30:30

Quote from: Taxi Al on 03 April 2015, 10:16:50

Have a good read of Bigtimes engine loom thread including linked threads and all will be revealed :y

That will take a day  ;D ;D ;D ;D

It plugs into this thing.Which is bolted on the back of your 2,4,6 head..(Radio Suppressor)
The Broken wire you have from the loom is Live When the ignition is on,
So Blank the end off and forget it,
Apparently its to stop Interference on the Am/Mw Side of your radio.  :y

(https://dl.dropboxusercontent.com/u/70807181/suppressor.JPG)

Title: Re: Brown wire, NS bank?
Post by: GastronomicKleptomaniac on 03 April 2015, 18:23:51

That explains why the end looked burnt then! Thank you Bigster! :D