Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: hawke113a on 05 April 2015, 17:01:37
-
im doing the 3ltr conversion to my 2.5 with 2.6/3.2 exhaust manifold...the questions i have is are the 2.5 manifold gaskets the same as the 2.6 and will the 2.5 maf work with the 3ltr conversion....do i need to buy another maf as mine was working fine before...cheers
-
im doing the 3ltr conversion to my 2.5 with 2.6/3.2 exhaust manifold...the questions i have is are the 2.5 manifold gaskets the same as the 2.6 and will the 2.5 maf work with the 3ltr conversion....do i need to buy another maf as mine was working fine before...cheers
Can't help with the MAF, but the gaskets aren't compatible. You need the 2.6/3.2 gaskets to match the manifolds, as neither have the EGR holes. They're surprisingly expensive too.
-
The gaskets are compatible. In fact its always recommended to use the 2.6/3.2 gaskets on the earlier engines.
-
The gaskets are compatible. In fact its always recommended to use the 2.6/3.2 gaskets on the earlier engines.
I'm sure that's what I said?
-
The gaskets are compatible. In fact its always recommended to use the 2.6/3.2 gaskets on the earlier engines.
I'm sure that's what I said?
Hmmm, not how it reads to me. But then I am very stupid ;D
-
ok me confused nick your saying not compatible and the boy your saying they are :-\
-
If you lay a 2.5 gasket on a 2.6 manifold, you'll see that they won't work. Been there, done that, and still got the 3.0l exhaust gaskets that came with my head set.
You need the 2.6/3.2 gaskets to match the manifolds. Which is what I wrote the first time!
-
thanks nick...ill get some ordered... :y