Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: terry paget on 13 May 2015, 21:32:12

Title: V6 small breather hole blocked. How best to clear?
Post by: terry paget on 13 May 2015, 21:32:12

As above. Failed to push wire through it. Maintenance guide states use 1.5mm drill; sounds good advice, not sure how to hold it. Pin vice?

Title: Re: V6 small breather hole blocked. How best to clear?
Post by: amba on 13 May 2015, 22:10:09

Use the copper earth wire from a bit of 2.5mmT/E cable...cut it to about 200mm in length and simple flexy bit of rigid "pokey tool" :y

Title: Re: V6 small breather hole blocked. How best to clear?
Post by: Nick W on 13 May 2015, 22:20:35

Quote from: amba on 13 May 2015, 22:10:09

Use the copper earth wire from a bit of 2.5mmT/E cable...cut it to about 200mm in length and simple flexy bit of rigid "pokey tool" :y

Don't forget to attach a Vauxhall badge to the non pokey end before you use it or TEOTWAKI will occur!

Title: Re: V6 small breather hole blocked. How best to clear?
Post by: amba on 13 May 2015, 22:30:23

And a swarms of locusts will blacken the skies and we will all become swallowed into the bowels of the earths core . ;D

Title: Re: V6 small breather hole blocked. How best to clear?
Post by: the alarming man on 13 May 2015, 22:46:04

Quote from: amba on 13 May 2015, 22:30:23

And a swarms of locusts will blacken the skies and we will all become swallowed into the bowels of the earths core . ;D

that the haldron colliders job is it not TEOTWAWKI ;D :y

Title: Re: V6 small breather hole blocked. How best to clear?
Post by: chrisgixer on 13 May 2015, 22:49:40

Paper clip. ...av it!