Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy A on 17 May 2015, 12:29:59

Title: 2.6 Cleaning the crankcase breathers question
Post by: Andy A on 17 May 2015, 12:29:59

Is it possible to clean the crankcase breathers on a 2.6 2002 without taking the plenum off?

Thanks

Title: Re: 2.6 Cleaning the crankcase breathers question
Post by: TheBoy on 17 May 2015, 13:29:06

The throttle body needs to come off, and that will be a bitch without removing plenum. Also getting the 2 rubber pipes off going to breather box will be easier with plenum removed.

Title: Re: 2.6 Cleaning the crankcase breathers question
Post by: Andy A on 17 May 2015, 13:40:25

I'll take the plenum off then and get some new seals.  :y

Thanks for your advice.  :y

Title: Re: 2.6 Cleaning the crankcase breathers question
Post by: chrisgixer on 17 May 2015, 13:56:56

Shouldn't need any seals.

Unless there's some buggered already..? The D shaped one in the Eco tech plastic bit to plenum is nla anyway.

Title: Re: 2.6 Cleaning the crankcase breathers question
Post by: Andy A on 17 May 2015, 14:43:36

Quote from: chrisgixer on 17 May 2015, 13:56:56

Shouldn't need any seals.

Unless there's some buggered already..? The D shaped one in the Eco tech plastic bit to plenum is nla anyway.

That's a bit of good news then. I'll check them all just in case.


Thanks Chris.  :y