Omega Owners Forum
Chat Area => General Car Chat => Topic started by: Kevin Wood on 16 July 2015, 14:55:27
-
I've had enough of jubilee clips. Does anyone know where I can buy an assortment of constant force spring hose clamps as used for the coolant hoses on an Omega out of the factory?
This sort of thing: (http://www.mubea.com/uploads/pics/standard-hose-clamp_1__02.jpg)
I have seen single clamps on Ebay, and assortments designed more for fuel hoses that don't really reach the larger end of the size spectrum needed for coolant hoses. Problem is, you need to select one that's the right size, so I'd like a box of assorted sizes really.
-
Hm.. I found these just the other day. Of course I can't find them again, now..
These people list small ones but say larger are available: http://abbeyclamps.co.uk/index.php/self-closing-ear-clamps.html
This lot list all sorts of sizes: https://www.hcl-clamping.co.uk/36-rotor-spring-band-hose-clamp-constant-tension
Neither are the site I found the other day. :(
-
Try these (http://www.emwardfastenings.com/product-range.html) guys.
-
Loads on the bay :y
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2060353.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=Constant+Tension+Clamps&_sacat=0
-
Wow! Many thanks for the suggestions, chaps. :y
No assortments on offer that I can see, but they are cheap enough that I'll just buy a load in a range of sizes and make my own, I think.
Thanks again.
Now to fix my incontinent LPG vapouriser. ::)
-
Yes I remember posting similar re oppsing hopeless jubilees, and remember masters words that they provide equal pressure around the entire circumference and automatically adjust to natural compression of the rubber hose over time. Something jubilees can't possibly do, and they always have a flat on the worm gear that leaks by eventually.
I didn't fully appreciate Masters words at the time, but they where ringing in my ears as I fitted the poxy things in the LPG kit, and again as I swappd them out for spring clips gathered from another car. They seize, they wear the thread, the thread brakes, they have a flat on the worm gear, they can't automatically adjust to expansion and hence the ALWAYS leak. Grrrrrrrr ;
rant off! ;D
-
http://www.advancedfluidsolutions.co.uk/111-piece-spring-clip-assortment-box-mikalor-constant-tension-clamps-2093-p.asp
-
I didn't fully appreciate Masters words at the time, but they where ringing in my ears as I fitted the poxy things in the LPG kit, and again as I swappd them out for spring clips gathered from another car. They seize, they wear the thread, the thread brakes, they have a flat on the worm gear, they can't automatically adjust to expansion and hence they ALWAYS leak. Grrrrrrrr ;
The millions of them sold for the last 94 years always leak? This seems unlikely, especially considering the uses they get put to. I've had more problems with the constant tension clamps on the Omega than I have with all the other cars I've owned over the last 27 years. Which is why I bin the spring clamps and replace them with a branded clip. Worm drive clamps cover a wide range of sizing, and the overlap is good, so finding one that fits the diameter correctly(use the smallest one possible) is easy.
As for the much mentioned expansion, once again, just how much do the components on an engine actually expand? Add the expansion in the clamp, and the give in the hose, and the expansion requirement is even smaller. My suspicion is that we'd struggle to measure it with everyday instruments, which makes the whole point moot.
The flat for the worm gear can be a problem in smaller sizes, so care must be taken.
Jubilee clips do rust, but then so do the spring clamps as they're made of steel! A seized worm is easily removed with decent side cutters.
-
I didn't fully appreciate Masters words at the time, but they where ringing in my ears as I fitted the poxy things in the LPG kit, and again as I swappd them out for spring clips gathered from another car. They seize, they wear the thread, the thread brakes, they have a flat on the worm gear, they can't automatically adjust to expansion and hence they ALWAYS leak. Grrrrrrrr ;
The millions of them sold for the last 94 years always leak? This seems unlikely, especially considering the uses they get put to. I've had more problems with the constant tension clamps on the Omega than I have with all the other cars I've owned over the last 27 years. Which is why I bin the spring clamps and replace them with a branded clip. Worm drive clamps cover a wide range of sizing, and the overlap is good, so finding one that fits the diameter correctly(use the smallest one possible) is easy.
As for the much mentioned expansion, once again, just how much do the components on an engine actually expand? Add the expansion in the clamp, and the give in the hose, and the expansion requirement is even smaller. My suspicion is that we'd struggle to measure it with everyday instruments, which makes the whole point moot.
The flat for the worm gear can be a problem in smaller sizes, so care must be taken.
Jubilee clips do rust, but then so do the spring clamps as they're made of steel! A seized worm is easily removed with decent side cutters.
Fit an LPG kit with supplied oppsing shite jubilee clips, then we'll talk some more. :)
-
http://www.advancedfluidsolutions.co.uk/111-piece-spring-clip-assortment-box-mikalor-constant-tension-clamps-2093-p.asp
I can vouch for AFS. I use them quite a bit for work stuff ;)
-
Clearly a sign of the wrong part for the job... ;) but cheap jubilee clips are probably half the price of spring clips :-\
-
I'm with Nick. If you use the right size Jubilee Clip and use the right amount of torque to fasten them, you should never have any prolems. Most people, including Mechanics do them up FT which will cause the worm to fail. The hose should be a tight fit anyway, and should make a decent seal. The idea of the clip is to stop it falling off in normal use! Nip it up and check for leaks, if there is a leak, a quater turn is all you normally need. Over tighten and you will pinch the rubber, or destroy the worm.
Spring clips are a pain in the ass. You have to get the EXACT size to fit the application, you need a decent tool (fnar) to fit and loosen them... That tool never fits in the small hole (fnar fnar) you are working in.. Meh. Horses for Courses. I'll stick to what I prefer and have never had problems with, ta.
-
Clearly a sign of the wrong part for the job... ;) but cheap jubilee clips are probably half the price of spring clips :-\
And generally work well enough............. ;) ;)
-
Clearly a sign of the wrong part for the job... ;) but cheap jubilee clips are probably half the price of spring clips :-\
And generally work well enough............. ;) ;)
Aye... Was refering to the 'complete' lpg front end kits supplied with cheap jubilee clips rather than stainless spring ones thereby increasing the suppliers margins ;)
-
Clearly a sign of the wrong part for the job... ;) but cheap jubilee clips are probably half the price of spring clips :-\
And generally work well enough............. ;) ;)
Er, well, no. Actually, that's the point. They don't, and is why manufacturers dont use them on the cooling system.
Like Nick and others I was slightly skeptical at Marks comments all those years ago. But he's absolutely right. As usual.
Expansion and contraction of rubber hose over thousands of heat cycles under a fixed diameter fitting means the jubilee will, eventually, leak by. Especially by the worm gear.
Just does. Presume Kevs issue is similar.
-
Er, well, no. Actually, that's the point. They don't, and is why manufacturers dont use them on the cooling system.
Like Nick and others I was slightly skeptical at Marks comments all those years ago. But he's absolutely right. As usual.
Expansion and contraction of rubber hose over thousands of heat cycles under a fixed diameter fitting means the jubilee will, eventually, leak by. Especially by the worm gear.
Just does. Presume Kevs issue is similar.
Nah, cobblers. Manufacturers dont use them because it takes time to tighten them up.
Remember, everything is pretty much assembled before the engine marries the car. Then look at the heater hoses - they are push fit with a locking tab. Why? because they are fitted after the engine has been mounted. Quick and easy (although expensive).
It's got bugger all to do with reliability... It's all to do with cost of production, including the time to fit.
-
Er, well, no. Actually, that's the point. They don't, and is why manufacturers dont use them on the cooling system.
Like Nick and others I was slightly skeptical at Marks comments all those years ago. But he's absolutely right. As usual.
Expansion and contraction of rubber hose over thousands of heat cycles under a fixed diameter fitting means the jubilee will, eventually, leak by. Especially by the worm gear.
Just does. Presume Kevs issue is similar.
Nah, cobblers. Manufacturers dont use them because it takes time to tighten them up.
Remember, everything is pretty much assembled before the engine marries the car. Then look at the heater hoses - they are push fit with a locking tab. Why? because they are fitted after the engine has been mounted. Quick and easy (although expensive).
It's got bugger all to do with reliability... It's all to do with cost of production, including the time to fit.
Again, fit an LPG kit with the supplied jubilees. Then we can talk. :y
-
Er, well, no. Actually, that's the point. They don't, and is why manufacturers dont use them on the cooling system.
Like Nick and others I was slightly skeptical at Marks comments all those years ago. But he's absolutely right. As usual.
Expansion and contraction of rubber hose over thousands of heat cycles under a fixed diameter fitting means the jubilee will, eventually, leak by. Especially by the worm gear.
Just does. Presume Kevs issue is similar.
Nah, cobblers. Manufacturers dont use them because it takes time to tighten them up.
Remember, everything is pretty much assembled before the engine marries the car. Then look at the heater hoses - they are push fit with a locking tab. Why? because they are fitted after the engine has been mounted. Quick and easy (although expensive).
It's got bugger all to do with reliability... It's all to do with cost of production, including the time to fit.
Again, fit an LPG kit with the supplied jubilees. Then we can talk. :y
I replaced several a couple of weeks ago, as whoever installed the kit (bearing in mind it was a few years ago) used the wrong size. I had a coolant 'weep' from the vaporisor. Pipes off, new Jubilee's (in the correct sorta size) and cushty.
No pissing about with clips which 'ping' all over the place. Don't get me wrong, there is nowt bad about them, I just like to know something is tightened to MY specification, and not that of a supplier who doesn't know the application it's being used for. :y
-
Clips are a pain to use , but give it time and the jubilees WILL leak. Mine leaked after a year or two. As have Kevin's by the sound of it I guess? And aTB had similar on his.
The fact the clip was the wrong size means little more than poor fitting.
-
Bewere
Avoid the cheep Chinese ones on offer or any of the gold coloured ones.
Tried quite a few and pretty much all are crap with little or no tension after a few months or even friggin days >:(
I settled on the Mikalor brand for all my LPG / Water pipes and not had a problem since :y :y