Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: sax-p on 29 July 2015, 08:12:51

Title: 2.2 dti speedo not working and p0500
Post by: sax-p on 29 July 2015, 08:12:51

Hello, haven't been on here for ages  :'(

As per title can someone help me out, only thing I can see that's gone wrong is the near side rear abs ring is damaged. If I change the shaft will this fix my problem???

(http://i1101.photobucket.com/albums/g428/rallysaxo/B6E79C8E-9FCC-4002-9560-F4F3F993A91E_zpsnv8k5rgc.jpg) (http://s1101.photobucket.com/user/rallysaxo/media/B6E79C8E-9FCC-4002-9560-F4F3F993A91E_zpsnv8k5rgc.jpg.html)

Thanks in advance
Trev

Title: Re: 2.2 dti speedo not working and p0500
Post by: terry paget on 29 July 2015, 08:31:13

Almost certainly. I had the same fault some years ago, reluctor ring was split and it was able to move out of alignment with the sensor. Apart for the speedo failing, you should have ABS and TC lights showing on the dash.

Title: Re: 2.2 dti speedo not working and p0500
Post by: sax-p on 29 July 2015, 12:51:52

Ya abs light is on, should I just replace the whole shaft or can this be changed???

Title: Re: 2.2 dti speedo not working and p0500
Post by: terry paget on 29 July 2015, 13:09:32

Easier to but a second half drive shaft and fit that.

Title: Re: 2.2 dti speedo not working and p0500
Post by: Marks DTM Calib on 29 July 2015, 14:34:55

The damage looks very minimal to me, any sign of sensor damage or is the ring physically split and/or teeth missing?

Title: Re: 2.2 dti speedo not working and p0500
Post by: sax-p on 09 August 2015, 20:17:41

Changing the shaft didn't fix the problem  >:( >:( >:(

Checked the resistance on the sensors and they seem okay 1.5 ohms.

Could it be the abs ecu???

Title: Re: 2.2 dti speedo not working and p0500
Post by: sax-p on 12 August 2015, 20:22:38

Right update, changed the abs ecu but light is still on. Do I have to get it programmed or will it be fine, it is second hand and it came from a 2.2dti as well.

Any light on the situation would be greatly appreciated as the van is going for the yearly test and need the light and speedo working  >:( >:( >:(

Thanks
Trevor

Title: Re: 2.2 dti speedo not working and p0500
Post by: terry paget on 13 August 2015, 17:36:57

Quote from: sax-p on 12 August 2015, 20:22:38

Right update, changed the abs ecu but light is still on. Do I have to get it programmed or will it be fine, it is second hand and it came from a 2.2dti as well.

Any light on the situation would be greatly appreciated as the van is going for the yearly test and need the light and speedo working  >:( >:( >quote: Check the gearboxes on donor and your car were the same (manual or auto).

Title: Re: 2.2 dti speedo not working and p0500
Post by: sax-p on 16 August 2015, 18:06:08

Yeah it was manual same as mine.

Plugged it into a computer today but couldn't communicate with the ecu, this mean I need another ecu???

Thanks