Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: calibrated on 07 August 2015, 12:18:18

Title: X30XE wiring scheme info needed
Post by: calibrated on 07 August 2015, 12:18:18

Hi folks...i bought x30xe engine for swap...i need wiring scheme(colors/what is used for) for 3 round connectors(BLUE,WHITE AND YELLOW/TAN)...loom came out from automatic transmission...immobiliser will be turned off ...thanks in advance

Title: Re: X30XE wiring scheme info needed
Post by: 05omegav6 on 07 August 2015, 15:15:27

Haynes manual contains that what you require... good luck ignoring the immobiliser though :-X

Title: Re: X30XE wiring scheme info needed
Post by: calibrated on 07 August 2015, 16:35:25

Thank you for your reply..as for the imobiliser theres is some company in my city that copes with electrics and they claim they can turn off immobiliser from the ecu for around 30 euros(20quid )

Title: Re: X30XE wiring scheme info needed
Post by: zirk on 07 August 2015, 17:53:53

Just for info, the loom tells the ECU whether its a Auto or Manual.

Title: Re: X30XE wiring scheme info needed
Post by: calibrated on 08 August 2015, 09:19:11

What do you mean by that? Im transplanting engine to calibra,manual transmission...i will leave automatic gearbox connectors unconnected...is that enough or do i need to do anything else?

Title: Re: X30XE wiring scheme info needed
Post by: davieboy0312 on 08 August 2015, 12:30:54

I needed all that info to finding wire colours.

Taxi al suggested to me the Haynes manual method. Worked for me. Just get a magnifying glass damn small writing

Title: Re: X30XE wiring scheme info needed
Post by: calibrated on 08 August 2015, 16:06:59

Does someone has a link with that description or something from haynes manual,download link or something? It would be appreciated,thanks..

Title: Re: X30XE wiring scheme info needed
Post by: davieboy0312 on 08 August 2015, 17:59:13

Buy a Haynes manual. The wiring diagrams are up the back. Easy to find out

Title: Re: X30XE wiring scheme info needed
Post by: TheBoy on 08 August 2015, 19:37:25

I'm guessing Haynes isn't well known in Croatia ;)

This is the sort of thing:
http://www.ebay.co.uk/itm/Haynes-manual-for-Vauxhell-Omega-1994-to-1999-hardback-/321823631621?hash=item4aee2ee905

Title: Re: X30XE wiring scheme info needed
Post by: calibrated on 20 August 2015, 18:00:24

Thank you very much...i need one more advice..i would like to fit c20xe external oil cooler...is it ok? I have the original one which is not leaking but many people scared me with stories that it can broke anytime and that c20xe one is better

Title: Re: X30XE wiring scheme info needed
Post by: calibrated on 25 September 2015, 09:09:26

(http://i60.tinypic.com/if3e2o.jpg)
(http://i62.tinypic.com/s5airn.jpg)
(http://i62.tinypic.com/2hzmg7o.jpg)
(http://i57.tinypic.com/2en8048.jpg)
(http://i60.tinypic.com/hrc66h.jpg)
(http://i58.tinypic.com/2j2yce8.jpg)
(http://i62.tinypic.com/2cqihau.jpg)
(http://i57.tinypic.com/2ib0sc3.jpg)
(http://i58.tinypic.com/ftg1tg.jpg)
(http://i57.tinypic.com/zoexwm.jpg)

Title: Re: X30XE wiring scheme info needed
Post by: Vega on 25 September 2015, 09:31:10

Quote from: calibrated on 07 August 2015, 12:18:18

Hi folks...i bought x30xe engine for swap...i need wiring scheme(colors/what is used for) for 3 round connectors(BLUE,WHITE AND YELLOW/TAN)...loom came out from automatic

Where are they located, which part of the loom.

Title: Re: X30XE wiring scheme info needed
Post by: calibrated on 25 September 2015, 10:54:14

I have found out the wiring scheme,thanks...engine is wired in,starts on a harf turn of the key and after 2 seconds cuts off....but the maf sensor,vacuums,lambda sensors and inlet pipes are not connected so i didnt expect it to start to work until its all onnected..