Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: sax-p on 03 September 2015, 15:12:18

Title: 2.5td box into 3.0 litre omega
Post by: sax-p on 03 September 2015, 15:12:18
Question is will they bolt up? Ie starter.  Also what clutch and flywheel can I use?

Or will it be easier to get a manual box and setup out of a 3.0? Also would a 2.0 box and stuff fit?

Sorry for all the questions but want to try and start driffing on the cheap.

Thanks
Trev
Title: Re: 2.5td box into 3.0 litre omega
Post by: tunnie on 03 September 2015, 15:59:41
The bell housing between V6 and TD is different, swap those over and all should be fine I would think.
Title: Re: 2.5td box into 3.0 litre omega
Post by: biggriffin on 03 September 2015, 17:53:37
Round and round the mulberry bush, ;D
 another perfectly good omega about to be wrecked, be wanting a lsd next :-\ brace yourself.
Glad mine went to a good home.
Title: Re: 2.5td box into 3.0 litre omega
Post by: Keith ABS on 03 September 2015, 19:05:28
  One quick queiry here regards the LSD. Does anyone know if the Senny/Carlton LSD is the same as the Mig item?

Keith ABS
Title: Re: 2.5td box into 3.0 litre omega
Post by: biggriffin on 03 September 2015, 19:12:35
  One quick queiry here regards the LSD. Does anyone know if the Senny/Carlton LSD is the same as the Mig item?

Keith ABS
incoming keith
Title: Re: 2.5td box into 3.0 litre omega
Post by: sax-p on 03 September 2015, 20:21:05
Round and round the mulberry bush, ;D
 another perfectly good omega about to be wrecked, be wanting a lsd next :-\ brace yourself.
Glad mine went to a good home.

Car already has an lsd, I'm not wrecking it. Car is being scrapped due to rust.
Title: Re: 2.5td box into 3.0 litre omega
Post by: sax-p on 03 September 2015, 20:22:03
The bell housing between V6 and TD is different, swap those over and all should be fine I would think.

Thanks, will try that out.