Omega Owners Forum

Chat Area => General Car Chat => Topic started by: tunnie on 19 September 2015, 20:09:34

Title: MaxTrac Shocks - A Review
Post by: tunnie on 19 September 2015, 20:09:34
I did want Meyle shocks, but AGP said they would be at least 3 to 4 weeks. I was recommended MaxTrac, they are made to OEM spec and came in at under £50 the pair with an OOF discount.

A few pictures, note the fitting kit is almost identical to GM.

(https://dl.dropboxusercontent.com/u/803897/Omega/Suspension/20150919_133907756_iOS.jpg)

(https://dl.dropboxusercontent.com/u/803897/Omega/Suspension/20150919_133915396_iOS.jpg)

Front row is MaxTrac kit, back row is 1 month old GM fitting kit.

(https://dl.dropboxusercontent.com/u/803897/Omega/Suspension/20150919_134313710_iOS.jpg)

(https://dl.dropboxusercontent.com/u/803897/Omega/Suspension/20150919_134318952_iOS.jpg)

They replaced knackered GM's so its lot stiffer than before, so I guess time will tell if they hold up.  :)

I've still not solved all the rear suspension noise from the 2.2, I think the rear donuts needs to be changed next as over the same roads it's noisier than the 3.2, which also runs standard shocks.
Title: Re: MaxTrac Shocks - A Review
Post by: 05omegav6 on 19 September 2015, 21:43:40
Much better effort than the Bilstein mounts :y

Hopefully the shocks will serve you well...
Title: Re: MaxTrac Shocks - A Review
Post by: TheBoy on 21 September 2015, 18:07:50
OK, things may have changed since I last fitted Bilstein shocks to the arse of mine, but I had no issues with the mounting kit as far as I can recall. But that was probably 5 or more years ago...  ...and still going strong :y