Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Shallow Al on 15 November 2015, 19:31:09

Title: NCDC2013.
Post by: Shallow Al on 15 November 2015, 19:31:09

hi all, my multi changer has taken to getting hung up while checking disc 4. Was playing fine, no errors.
Still ejects ok. tried another disc holder and a different cd, to no avail.
 :( :'(

Title: Re: NCDC2013.
Post by: tigers_gonads on 16 November 2015, 11:30:13

Pull it out, strip down and carefully clean the mech and re grease   :-\

Title: Re: NCDC2013.
Post by: TheBoy on 16 November 2015, 18:43:36

Its probably shagged TBH. Try to source a good cdc3, and swap bits over

Title: Re: NCDC2013.
Post by: Shallow Al on 17 November 2015, 23:35:52

Thanks for replies. Will bite the bullet and pull it out. Got a couple of 2006's somewhere which might be ok for a working multi changer.
Cheers.

Title: Re: NCDC2013.
Post by: TheBoy on 18 November 2015, 21:06:05

Yup, 2006 cdc3 will work.  Follow the guide, as you have to swap a board over.

Title: Re: NCDC2013.
Post by: Shallow Al on 20 November 2015, 23:55:08

Yes, cheers. Had some luck with one of the changers. :y
For reference, if I changed the whole ncdc2013, would swapping that circuit board take care of everything? Including the Bose low level output and the programming for the trip computer parameters, or would that need a Tech 2?

Title: Re: NCDC2013.
Post by: Dave DND on 21 November 2015, 15:44:54

No, that circuit board only takes care of the CD Changer

Title: Re: NCDC2013.
Post by: Shallow Al on 21 November 2015, 20:05:19

Ok. Thank you.