Omega Owners Forum

Chat Area => General Car Chat => Topic started by: Sir Sideways on 22 November 2015, 18:15:10

Title: irmscher exhaust?
Post by: Sir Sideways on 22 November 2015, 18:15:10: Did the omega come with an option for a stainless exhaust system (irmscher or other).

Regards

Jim
Title: Re: irmscher exhaust?
Post by: RobG on 22 November 2015, 18:18:42: Quote from: Sir Sideways on 22 November 2015, 18:15:10
Did the omega come with an option for a stainless exhaust system (irmscher or other).

Regards

Jim
Not that I`m aware of :-\
Title: Re: irmscher exhaust?
Post by: serek on 22 November 2015, 18:20:18: back box only
Title: Re: irmscher exhaust?
Post by: biggriffin on 22 November 2015, 19:18:20: Jetex system is stainless, and still available from demon twerps,and is a proper twin box system as per the standard system hence its £600 price,good fit too. 8)
Title: Re: irmscher exhaust?
Post by: Sir Sideways on 22 November 2015, 19:18:55: Ok thanks, looking to get a stainless built in the future and want it to be as close to standard as poss. Also undeceided wether to go single or twin exit.
Title: Re: irmscher exhaust?
Post by: Lazydocker on 22 November 2015, 20:43:50: Quote from: Sir Sideways on 22 November 2015, 19:18:55
Ok thanks, looking to get a stainless built in the future and want it to be as close to standard as poss. Also undeceided wether to go single or twin exit.

Wherever they tell you, you need to keep twin pipe and mid boxes, otherwise there's likely to be a loss in power ;)
Title: Re: irmscher exhaust?
Post by: Sir Sideways on 22 November 2015, 21:08:23: Yep will do. Think ill probably stick to the single side twin exit 65mm. I dont fancy the look of 4 pipesat all - too chavy.
Title: Re: irmscher exhaust?
Post by: Sir Sideways on 22 November 2015, 21:15:35: Just remembered, on my last omega, it went to 1 pipe after the middle box. Iirc it was 75 -80mm pipe to make up for 2 pipes. Didnt loose any power.
Title: Re: irmscher exhaust?
Post by: zirk on 23 November 2015, 14:09:33: If your going for a custom job, I wouldn't rule out Long life Exhausts, had a few SS Exhausts by them now, while they can build to OEM spec they can also tinker with it to your own design for not much more money. ;)
Title: Re: irmscher exhaust?
Post by: Sir Sideways on 23 November 2015, 14:13:51: Powerflow is my local or SS Silencers. Ill have a look round to see whos nearby to staffordshire
Title: Re: irmscher exhaust?
Post by: zirk on 23 November 2015, 14:28:13: Quote from: Sir Sideways on 23 November 2015, 14:13:51
Powerflow is my local or SS Silencers. Ill have a look round to see whos nearby to staffordshire
Not near you but LL at Bristol have made up a full system to include a Left / Right fear to suit the Irmscher rear bumper, they may still have the plans, template.
Title: Re: irmscher exhaust?
Post by: Sir Sideways on 23 November 2015, 14:43:44: Bit fa away but id also need a Irmscher bodykit first lol.
Title: Re: irmscher exhaust?
Post by: zirk on 23 November 2015, 15:13:06: Quote from: Sir Sideways on 23 November 2015, 14:43:44
Bit fa away but id also need a Irmscher bodykit first lol.
Good luck with that one.

Probably better to put some money aside and buy a whole car with it all on if I'm honest, as or if one does come up.
Title: Re: irmscher exhaust?
Post by: TheBoy on 23 November 2015, 17:34:03: There was no stainless option from the factory. Irmscher was the official I-Line styling provider, but this was all aftermarket, not factory fit.

Irmscher offered 2 stainless backbox options, but not a complete exhaust (as they are predominantly a styling company)
Title: Re: irmscher exhaust?
Post by: Sir Sideways on 23 November 2015, 19:07:48: The main reason for the post was to see what irmscher tailpipes look like so I can replicate them. I'm just gonna go for the single exit twin slash 65(ish)mm.

Thanks for the replys