Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy A on 30 January 2016, 17:16:25

Title: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please
Post by: Andy A on 30 January 2016, 17:16:25

As in the tittle says, a post cat gasket part number needed and the part number or the size of bolts for that exhaust flange please.

Thanks

Title: Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please
Post by: TheBoy on 30 January 2016, 18:26:44

There are no gaskets post cat.

Title: Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please
Post by: TheBoy on 30 January 2016, 18:27:08

2 9157096  8 54 928 GASKET, FRONT EXHAUST PIPE TO MANIFOLD

Is manifold to cat section

Title: Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please
Post by: Andy A on 30 January 2016, 19:53:06

Where the exhaust front, post cat connects to the centre section of the exhaust on the flange there is no gasket in there. Are they just a tapered fit then and do I need to re-tighten  bolts to seal or should I put some exhaust sealant past in there and then re-tighten the bolts?

I had a new clutch put in a while back and they couldn't of tightened the two bolts up tight enough.

Thanks

Title: Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please
Post by: TheBoy on 30 January 2016, 20:07:31

I believe its a taper. Should be fine without paste, but if not, a thin smear of paste before fitting to taper.

Key is to clean it up properly first.

Title: Re: Omega 2.2 petrol Z22XE 2003 post cat gasket number needed please
Post by: Andy A on 30 January 2016, 20:40:48

Will do and thanks for the info and advice.  :y :y

Andy