Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: red62 on 16 July 2008, 22:13:17

Title: In at the deep end
Post by: red62 on 16 July 2008, 22:13:17
Well after completing the cam cover gasket and associated pipe cleaning
I thought I would tackle the cam belt & water pump got the DVD  the other day parts and locking kit arrived today will go for it this weekend. Just one question how long should this take, do I tell her who must be obeyed I will be under the bonnet all weekend  ;) so she cannot go shopping or just one day ? And are there any problems I may come across that are not covered by the DVD.
Any advise would be appreciated.
Title: Re: In at the deep end
Post by: TheBoy on 16 July 2008, 22:18:57
last one i did was about 2hrs, but i did have a real, real, real bad hangover at the time...

1/2 day is enough for first one. more than enough
Title: Re: In at the deep end
Post by: albitz on 16 July 2008, 22:45:28
i did my first v6 recently and would agree with that.even being ultra careful with the odd cup of tea -5 hours. :y
Title: Re: In at the deep end
Post by: Darth Loo-knee on 16 July 2008, 22:46:13
2.5's there is no need to remove the Plenum :y

Just take your time mate the DVD is very good :y
Title: Re: In at the deep end
Post by: psychnurse on 16 July 2008, 22:47:48
Jut done my 2.0 for the first time ever.. took 90 mins. You will be fine  :y
Title: Re: In at the deep end
Post by: psychnurse on 16 July 2008, 22:48:36
Quote
Jut done my 2.0 for the first time ever.. took 90 mins. You will be fine  :y




sorry 2.5.... a bit longer!  :o
Title: Re: In at the deep end
Post by: Darth Loo-knee on 16 July 2008, 22:49:06
His is a V6 though... :y
Title: Re: In at the deep end
Post by: red62 on 18 July 2008, 11:55:20
Thanks for all the comments I will let you know how it all went.
the better half is pleased she can go shopping as well should be a good weekend

Cheers