Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: razzo on 03 April 2016, 16:48:21

Title: Thrust washer
Post by: razzo on 03 April 2016, 16:48:21

Replaced it today with the sonnax metal washer but no matter how I try to set end float with packing washers I still get 1.5mm instead of 0.1-0.8mm as in the guide, scratching my aching head trying to sort this but no joy, makes no difference if I use 1 or all 6 packing washers still get same result

Any ideas?