Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: omegod on 25 June 2016, 18:23:50
-
Got this coming in tomorrow, it's a very good runner on a 52 plate and fuel pump is A1 ! :y
Locking motors £15
I'll add more later but in the meantime give me a shout
-
Is it Z147 or Z157. If so, is the front bumper in good condition? I need one and would be glad to collect from Liverpool.
Cheers.
-
Being a facelift it's likely Z157 but the difference is negligible, it's coming in tomorrow I'll see if it's ok
-
Thanks. I may need a couple of other items also.
-
Any developments on this?
-
A bit scraped on one corner mate and no holes for washers, it's s GLS
-
Pity, but thanks anyway.
What's the condition of the offside driver's mirror and offside headlight assemblies? If they're good and in working order, can I have a price, please?
Is the nearside front door rubbing strip OK, and could it be removed successfully?
Are you going to post a list of other parts and prices?
Cheers,
Bill.
-
Pity, but thanks anyway.
What's the condition of the offside driver's mirror and offside headlight assemblies? If they're good and in working order, can I have a price, please?
Is the nearside front door rubbing strip OK, and could it be removed successfully?
Are you going to post a list of other parts and prices?
Cheers,
Bill.
Bill, sent you a PM
-
:y Replied.
-
depending on condition , a/c condenser & possibly radiator. :y
-
depending on condition , a/c condenser & possibly radiator. :y
Both look good, I'll be getting them out to remove the fuel pump in the next few days, if the condensor is holding pressure I'll get back to you :y
-
All panels are now spoken for including both bumpers
-
depending on condition , a/c condenser & possibly radiator. :y
Both look good, I'll be getting them out to remove the fuel pump in the next few days, if the condensor is holding pressure I'll get back to you :y
my rad looks very good, but can only see side facing condenser, but my condenser is knacked. also I probably need an oil cooler, plus oil filter housing, checking that out tomorrow.
-
Righto,
Door mirrors £15 + post
Front locking motors £15 + post
120 amp alternator £20 + post
Very good condition, near new dti exhaust £ 25 collected
Rear brake set up , 2 x V good solid discs, with no lips ,pads and both calipers £30 collected
Nice climate panel £15 + post
Good headlights with intact adjusters £15 each plus post at your risk
Very good rad , marks to fins from removal, £20
-
What is the tailgate like please?
-
Sold pal, someones bought all the removable panels and bumpers
-
Still pulling this apart but it will be going over the bridge soon, any last orders ?
Bumpers gone, All panels including sill caps gone,tow bar gone, gearbox and prop gone
Good fuel injection pump is up for high price on ebay but open to offers
-
Still pulling this apart but it will be going over the bridge soon, any last orders ?
Bumpers gone, All panels including sill caps gone,tow bar gone, gearbox and prop gone
Good fuel injection pump is up for high price on ebay but open to offers
I badly need that black coloured vacuum pipe that connects to brake vacuum pump at the top rear of engine. mine has snapped at the non-return valve. full pipe from servo. please give price with full postage to York.
-
Still pulling this apart but it will be going over the bridge soon, any last orders ?
Bumpers gone, All panels including sill caps gone,tow bar gone, gearbox and prop gone
Good fuel injection pump is up for high price on ebay but open to offers
I badly need that black coloured vacuum pipe that connects to brake vacuum pump at the top rear of engine. mine has snapped at the non-return valve. full pipe from servo. please give price with full postage to York.
You can replace it with vacuum hose available from your local hydraulics supplier. Buy some in the morning and you'll have the job done by lunchtime. This is a common fix for VAG cars when the nylon pipe rubs through on the bulkhead.
-
Still pulling this apart but it will be going over the bridge soon, any last orders ?
Bumpers gone, All panels including sill caps gone,tow bar gone, gearbox and prop gone
Good fuel injection pump is up for high price on ebay but open to offers
I badly need that black coloured vacuum pipe that connects to brake vacuum pump at the top rear of engine. mine has snapped at the non-return valve. full pipe from servo. please give price with full postage to York.
Probably something best bought new as said but give me a shout if you are stuck
-
Still pulling this apart but it will be going over the bridge soon, any last orders ?
Bumpers gone, All panels including sill caps gone,tow bar gone, gearbox and prop gone
Good fuel injection pump is up for high price on ebay but open to offers
I badly need that black coloured vacuum pipe that connects to brake vacuum pump at the top rear of engine. mine has snapped at the non-return valve. full pipe from servo. please give price with full postage to York.
You can replace it with vacuum hose available from your local hydraulics supplier. Buy some in the morning and you'll have the job done by lunchtime. This is a common fix for VAG cars when the nylon pipe rubs through on the bulkhead.
Still pulling this apart but it will be going over the bridge soon, any last orders ?
Bumpers gone, All panels including sill caps gone,tow bar gone, gearbox and prop gone
Good fuel injection pump is up for high price on ebay but open to offers
I badly need that black coloured vacuum pipe that connects to brake vacuum pump at the top rear of engine. mine has snapped at the non-return valve. full pipe from servo. please give price with full postage to York.
You can replace it with vacuum hose available from your local hydraulics supplier. Buy some in the morning and you'll have the job done by lunchtime. This is a common fix for VAG cars when the nylon pipe rubs through on the bulkhead.
its the non-return valve that's snapped at the inlet nipple.
-
You got pic of one Ray please
-
its the non-return valve that's snapped at the inlet nipple.
I suspect the same supplier would have them, or there is this LINK (http://www.carbuildersolutions.com/uk/nylon-non-return-valve-10mm)in your other thread.
-
You got pic of one Ray
the black stiff plastic pipe that comes from the servo then goes to the back of the engine onto the vacuum brake pump . its released from the pump quite easily . where its fastened to the brass nut which is connected to pump there is a button type fastener which when pressed releases the black pipe from brass bolt. a bit of a tug usually. noticed by looking at mine it has a yellow washer type thing & the button is in between that on the widest part of black pipe. hope that makes sense , cannot do pics sorry
-
Have you still got the alternator?
-
Yup