Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Shackeng on 04 July 2016, 16:09:02

Title: Autobox thrust washer replacement.
Post by: Shackeng on 04 July 2016, 16:09:02

What gaskets do I need when replacing the thrust washer?
For info JPAT do the washer for £19 plus VAT for OOF members.

Title: Re: Autobox thrust washer replacement.
Post by: razzo on 07 July 2016, 08:27:14

only gasket you may need is the paper/card one which is revealed when you lift away the bell housing with the pump attached, there is also a large o ring seated around the pump where it meets the bell housing. Didn't replace mine as they seemed ok & no leaks as yet oh & gaskets for sump pans  :y

Title: Re: Autobox thrust washer replacement.
Post by: Shackeng on 07 July 2016, 13:16:49

Quote from: razzo on 07 July 2016, 08:27:14

only gasket you may need is the paper/card one which is revealed when you lift away the bell housing with the pump attached, there is also a large o ring seated around the pump where it meets the bell housing. Didn't replace mine as they seemed ok & no leaks as yet oh & gaskets for sump pans  :y

Cheers Razz :y