Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: wordsworth798 on 04 September 2016, 17:36:41

Title: timing belt marks
Post by: wordsworth798 on 04 September 2016, 17:36:41

Hello there,In the thoes of renewing belt w/pump tensioner pulleys on my 1998 20ltr auto,did the stripping down ect
locked off cams,tippexed marks and bottom pulley(tensioner broken)
   So i removed belt which was a little marked,checked to see any damage then i noticed the inlet cam straight mark
but exhaust was triangle on cover and cam the straight mark was 10 notches to the left.
I put on new tensioner and reassembled and turned engine by hand ok Q: is the triangle on cover and cam correct
or could the exhaust cam jumped backwards 10 notches.
Thank you all in advance

Title: Re: timing belt marks
Post by: baggers on 04 September 2016, 23:28:02

(http://iancctv.dyndns.tv:81/cam2)

(http://iancctv.dyndns.tv:81/belt)