Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: 2.5v6 on 19 September 2016, 18:07:14
-
Hi guys needs some advice, Ive put on the 3.0 plenum onto a 2.5 and the accerator and cruise cable are a bit tight....do I need new cables and the bracket that holds then in???
-
3.0L cables needed as longer.
-
Though what are you hoping to achieve, as the 2.5 plenum is better suited to the 2.5...
-
G cams have been fitted so was advised to fit the longer plenum, will both cables need changing?
-
G cams have been fitted so was advised to fit the longer plenum, will both cables need changing?
Yes as the mountings are in the same place but the throttle body is 4"+ further forward :y
-
Do they work?
You could easily move the cruise control motor forward a bit to gain some slack.