Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Celes on 27 September 2016, 20:40:09
-
Lads maybe you can shed some light on this. My mate's Omega 3.0 won't start. It's throwing the typical fault code "19"...we replaced the crank sensor but the engine still won't start.
Any ideas?!
-
Is it trying to start when was the last time it started and did it start o.k. have you tried looking at the coil pack.....what year is it...
-
Is it a pre face or a facelift?
-
It gave no indication that it would die. He drove it for 30minutes, started it again to move it 500m and then when he has to leave it refused to start. It turns over fine and has spark on all 6 cylinders. It's the facelifted version...year 1999.
-
It gave no indication that it would die. He drove it for 30minutes, started it again to move it 500m and then when he has to leave it refused to start. It turns over fine and has spark on all 6 cylinders. It's the facelifted version...year 1999.
Crank it over with the throttle open for about 30 seconds. If it starts, or coughs and splutters occasionally then it is flooded.
-
Lads maybe you can shed some light on this. My mate's Omega 3.0 won't start. It's throwing the typical fault code "19"...we replaced the crank sensor but the engine still won't start.
Any ideas?!
Genuine GM?
-
No idea mate, but I don't think so.
-
If it has a spark, the crank sensor must be working.
-
No idea mate, but I don't think so.
Experience on here suggests that non-GM crank sensors are not always reliable. :y
-
No idea mate, but I don't think so.
Experience on here suggests that non-GM crank sensors are not always reliable. :y
Just to add there is no such thing as a GM crank sensor. The X20XEV OEM is made by Siemens. Not sure who makes the V6 sensor.
So as long as you make sure it's the OEM then no need to buy from GM. I always use CES as they sell the Siemens sensors for all my X20XEV engined cars.
Funny thing is you can see where the GM logo has been melted away and only the Siemens logo remains.
-
No idea mate, but I don't think so.
Experience on here suggests that non-GM crank sensors are not always reliable. :y
Just to add there is no such thing as a GM crank sensor. The X20XEV OEM is made by Siemens. Not sure who makes the V6 sensor.
So as long as you make sure it's the OEM then no need to buy from GM. I always use CES as they sell the Siemens sensors for all my X20XEV engined cars.
Funny thing is you can see where the GM logo has been melted away and only the Siemens logo remains.
Fair point, what is actually made in that factory? The panels would be pressed there, I suppose, but all a car is, is an assembly of close-fitting separate products. Siemens, as you say as well as Bosch, depending on the model, are the Crank Sensors.
-
Siemens, as you say as well as Bosch, depending on the model, are the Crank Sensors.
But, just because it has Bosch on the side, it doesn't mean it has been made to the same specifications as a sensor supplied to GM by Bosch. GM's supply contract with Bosch may well prohibit that.
This is the whole folly with "OEM brand" parts. You are taking a punt and, when you're dealing with a part that isn't particularly reliable when genuine, there is little room for quality to drop.
-
Exhibit A: M'lud the Lemforder wishbones, which were the OEM's for Vauxhall, but have dropped in quality in recent years, I believe.
I've got a no-name coil pack fitted, only bought because I thought it was an original, but on closer inspection it's aftermarket, but no maladies in 2 years and counting. But agreed, you have to be careful. Coil pack was nigh-on a freebie, so thought nothing of it. But on a £25 sensor, when you can get a genuine for about £50, how many cheapies do you bu before regretting, and just going genuine?
If I saw some ex-dealer stock, sort of thing, and it was cheap, I'd give it a go.
-
Siemens, as you say as well as Bosch, depending on the model, are the Crank Sensors.
But, just because it has Bosch on the side, it doesn't mean it has been made to the same specifications as a sensor supplied to GM by Bosch. GM's supply contract with Bosch may well prohibit that.
This is the whole folly with "OEM brand" parts. You are taking a punt and, when you're dealing with a part that isn't particularly reliable when genuine, there is little room for quality to drop.
Nonsense, GM would prohibit them selling the part direct for a period of time. But no manufacturer would bother to re tool just to make the same product.
And yes I work in manufacturing......
Aftermarket parts will not be the same. Some better, some not so good.
-
Siemens, as you say as well as Bosch, depending on the model, are the Crank Sensors.
But, just because it has Bosch on the side, it doesn't mean it has been made to the same specifications as a sensor supplied to GM by Bosch. GM's supply contract with Bosch may well prohibit that.
This is the whole folly with "OEM brand" parts. You are taking a punt and, when you're dealing with a part that isn't particularly reliable when genuine, there is little room for quality to drop.
Nonsense, GM would prohibit them selling the part direct for a period of time. But no manufacturer would bother to re tool just to make the same product.
And yes I work in manufacturing......
Aftermarket parts will not be the same. Some better, some not so good.
You've clearly never fitted a non GM V6 crank sensor... :-X
There's probably a thousand years and a billion miles of Omega ownership behind this forum. Advice is given on the basis of that experience and should not be dismissed or countered lightly.
-
Siemens, as you say as well as Bosch, depending on the model, are the Crank Sensors.
But, just because it has Bosch on the side, it doesn't mean it has been made to the same specifications as a sensor supplied to GM by Bosch. GM's supply contract with Bosch may well prohibit that.
This is the whole folly with "OEM brand" parts. You are taking a punt and, when you're dealing with a part that isn't particularly reliable when genuine, there is little room for quality to drop.
Nonsense, GM would prohibit them selling the part direct for a period of time. But no manufacturer would bother to re tool just to make the same product.
And yes I work in manufacturing......
Aftermarket parts will not be the same. Some better, some not so good.
You've clearly never fitted a non GM V6 crank sensor... :-X
There's probably a thousand years and a billion miles of Omega ownership behind this forum. Advice is given on the basis of that experience and should not be dismissed or countered lightly.
Indeed.
-
There's probably a thousand years and a billion miles of Omega ownership behind this forum. Advice is given on the basis of that experience and should not be dismissed or countered lightly.
This sounds like a prologue for star wars saga ;D ;D
-
There's probably a thousand years and a billion miles of Omega ownership behind this forum. Advice is given on the basis of that experience and should not be dismissed or countered lightly.
This sounds like a prologue for star wars saga ;D ;D
That substitutes Trade Club for the Force, and has an even more rambling plot.
-
Ive got a genuine one tucked away in the boot, and its staying there.
The day i take it out and put it on a shelf in the garage is the day it ll die.
The previous owner got fed up having it off the road at a local country garage . Eventually they stuck a genuine sensor in, which has been sound for the last six years.
-
I'm in the genuine camp on this one,having let my son's place fit an after market crank sensor from CAF on one of my 3.2's,car ran OK for a few months and then...just when you don't need it,the usual symptoms started and and it was changed for a genuine one,problem solved. Same thing with the 3.0,only this time a non Bosch MAF sensor fitted and straight away it started throwing up fault codes and the car ran like crap,3 days later Bosch fitted and normal service was resumed.After market parts? not for me, buy once and buy right :y
-
Siemens, as you say as well as Bosch, depending on the model, are the Crank Sensors.
But, just because it has Bosch on the side, it doesn't mean it has been made to the same specifications as a sensor supplied to GM by Bosch. GM's supply contract with Bosch may well prohibit that.
This is the whole folly with "OEM brand" parts. You are taking a punt and, when you're dealing with a part that isn't particularly reliable when genuine, there is little room for quality to drop.
Nonsense, GM would prohibit them selling the part direct for a period of time. But no manufacturer would bother to re tool just to make the same product.
And yes I work in manufacturing......
Aftermarket parts will not be the same. Some better, some not so good.
You've clearly never fitted a non GM V6 crank sensor... :-X
There's probably a thousand years and a billion miles of Omega ownership behind this forum. Advice is given on the basis of that experience and should not be dismissed or countered lightly.
You stick with your non GM branded sensors . . . us long term Oof members will carry on using what we KNOW is best ;)
Also it may be prudent to check that your breakdown cover is up to date . . . as you will almost certainly be using it if fitting the other type on to a V6 omega ::)
-
My thoughts are well known on branded and pattern, I use both, the only exception is sensors, I only fit genuine sensors,
used pattern once, as others have said lasted about fortnight.
So listen to the years of experience, not the price.
-
Did I ever say that Heinz make HP beans? ::) ::) But they're not the same as Beanz :y :y
-
Did I ever say that Heinz make HP beans? ::) ::) But they're not the same as Beanz :y :y
Once or twice, we may have forgotten ;)
-
Did I ever say that Heinz make HP beans? ::) ::) But they're not the same as Beanz :y :y
Once or twice, we may have forgotten ;)
;D ;D ;D
-
Did I ever say that Heinz make HP beans? ::) ::) But they're not the same as Beanz :y :y
Course they are. I can see where the Heinz has rubbed off ! :P
-
Gentlemen please......no rubbing off here! :o
-
Gentlemen please......no ;D off here! :o
Breasts
-
Did I ever say that Heinz make HP beans? ::) ::) But they're not the same as Beanz :y :y
Course they are. I can see where the Heinz has rubbed off ! :P
;D
-
Gentlemen please......no rubbing off here! :o
;D ;D