Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: frostbite on 08 October 2016, 13:20:53

Title: Ar25 breather pipe
Post by: frostbite on 08 October 2016, 13:20:53

Hey

I will soon need to replace the breather on the slushbox

I can source a nitrile pipe that is resistant to pretty much anything bar melting but its not too flexible

Is there any alternative and what lenght will I be needing?


Edit: I put this in the wrong forum  >:(

Title: Re: Ar25 breather pipe
Post by: Nick W on 08 October 2016, 14:19:54

Oil resistant hose isn't difficult to find.

Title: Re: Ar25 breather pipe
Post by: frostbite on 08 October 2016, 22:50:27

ok, what length would I be looking at?

Title: Re: Ar25 breather pipe
Post by: Nick W on 08 October 2016, 23:02:42

It's supposed to be routed upwards, across the bell housing and hang down the other side. Mine got melted by the exhaust, and just hangs down, so it can't be too critical.