Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy A on 31 October 2016, 19:30:43

Title: Coil pack removal bolt size needed
Post by: Andy A on 31 October 2016, 19:30:43

After taking the securing bolts out of the coil pack, I then need two larger bolts to screw back in to pull the pack off.

What is the diameter of the bolt needed and what is the correct thread size?

I don't think my coil pack on my 2.2 can take another pulling out without the bolts.

Thanks

Title: Re: Coil pack removal bolt size needed
Post by: TheBoy on 31 October 2016, 19:35:16

v6 plenum bolts...   ...which is only handy if you have a v6 handy

Title: Re: Coil pack removal bolt size needed
Post by: Andy A on 31 October 2016, 23:11:56

Quote from: TheBoy on 31 October 2016, 19:35:16

v6 plenum bolts...   ...which is only handy if you have a v6 handy

I'll just have to hope someone on here has one lying around that they could measure for me.

Thanks

Title: Re: Coil pack removal bolt size needed
Post by: Steve B on 31 October 2016, 23:27:34

Just grab it at the back after unplugging it and slowly work it loose on the 2.2...(after removing bolts)

Title: Re: Coil pack removal bolt size needed
Post by: Andy A on 01 November 2016, 09:01:30

Quote from: Steve B on 31 October 2016, 23:27:34

Just grab it at the back after unplugging it and slowly work it loose on the 2.2...(after removing bolts)

If I can't get the bolt size that's what I'll do Steve.  :y

Thanks

Title: Re: Coil pack removal bolt size needed
Post by: biggriffin on 01 November 2016, 09:06:22

Tis eithe m6 or m8. Think m6 holds in, and m8 removes.

Title: Re: Coil pack removal bolt size needed
Post by: Andy A on 01 November 2016, 11:21:17

Quote from: biggriffin on 01 November 2016, 09:06:22

Tis eithe m6 or m8. Think m6 holds in, and m8 removes.

Thanks  :y