Omega Owners Forum

Chat Area => General Car Chat => Topic started by: Jimbob on 15 November 2016, 12:55:28

Title: torque settings req
Post by: Jimbob on 15 November 2016, 12:55:28

Im replacing the Aux belt and tensioner on the Zafira B (z19dth)  Does anyone (with tis) happen to have the torque settings (or any other useful tips)

Im not running any vauxhall software currently.

Cheers

Title: Re: torque settings req
Post by: Diamond Black Geezer on 15 November 2016, 13:27:20

Ok, useless in terms of a definitive answer, however, the Omega is 25Nm for the pulley (did mine t'uther day) and I can't imagine the Zafira being a squillion miles away from this.

Title: Re: torque settings req
Post by: TheBoy on 15 November 2016, 19:01:08

tensioner to block, 50nm

Title: Re: torque settings req
Post by: Jimbob on 15 November 2016, 20:51:33

Cheers

Title: Re: torque settings req
Post by: Doctor Gollum on 16 November 2016, 18:01:42

Slap it in and wind it up...

If it snaps it's too tight and if it rattles then it's not tight enough :D

Title: Re: torque settings req
Post by: Jimbob on 16 November 2016, 18:23:24

Moved on from that now....the other pully is completely missing!  Torque settings for that too please. :-)

Title: Re: torque settings req
Post by: Doctor Gollum on 16 November 2016, 18:25:42

The crank pulley?

Title: Re: torque settings req
Post by: Jimbob on 16 November 2016, 20:02:49

Idler between crank and ac

Title: Re: torque settings req
Post by: Doctor Gollum on 16 November 2016, 21:05:36

Ah ok... crank pulley failure is pretty routine way of destroying the engine bay on those, hence the suggestion  ;)

Title: Re: torque settings req
Post by: TheBoy on 17 November 2016, 19:26:23

Quote from: Jimbob on 16 November 2016, 20:02:49

Idler between crank and ac

60Nm