Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: steve6367 on 15 December 2016, 18:19:25
-
I have a worsening drone form the rear, gets worse when weight put on that wheel and better when cornering the other way.
Reading the posts on here I don't think I can do it at home.
£307.20 at local garage - seems a reasonable price based on how long it could taken them?
Does anyone on here do them for beer tokens? (I don't mind helping)
Steve
-
I've done several in the street, and reckon it's about a two hour job.
The bearing is £25 to 50 depending on how much of a risk you're prepared to take on a cheap one.
Where in the country are you?
-
I have a worsening drone form the rear, gets worse when weight put on that wheel and better when cornering the other way.
Reading the posts on here I don't think I can do it at home.
£307.20 at local garage - seems a reasonable price based on how long it could taken them?
Does anyone on here do them for beer tokens? (I don't mind helping)
Steve
My local indy replaced them for £40 each. :y
-
not sure where about are you ,
FAG or SKF bearing supply and fit £100 +vat
-
Thank you for the replies, I m in sunny Dorset.
Looks like I need to shop around more or travel!
-
there got to be a local member on forum who will be able to help :y
-
Before you start dismantling the car, I'd just confirm that the problem is actually the wheel bearing and not a tyre issue. A deformed tyre or a cheap budget tyre can sometimes make a droning noise that can be mistaken for a wheel bearing. I know you have stated it gets worse when cornering which would tend to indicate a wheel bearing problem, but I still think checking it's not a tyre issue whichever would be an easy check that may save unnecessary work and expense!
-
Have you actually jacked the car up to find out if there is play in the bearing or are you just basing it on noise alone? Also, might not be the side you think it is due to the sound travelling across the car, (if that makes sense).
-
I have a worsening drone form the rear, gets worse when weight put on that wheel and better when cornering the other way.
Reading the posts on here I don't think I can do it at home.
£307.20 at local garage - seems a reasonable price based on how long it could taken them?
Does anyone on here do them for beer tokens? (I don't mind helping)Steve
My local indy replaced them for £40 each. :y
Sorry I should have said I supplied the bearings. :y
-
Before you start dismantling the car, I'd just confirm that the problem is actually the wheel bearing and not a tyre issue. A deformed tyre or a cheap budget tyre can sometimes make a droning noise that can be mistaken for a wheel bearing. I know you have stated it gets worse when cornering which would tend to indicate a wheel bearing problem, but I still think checking it's not a tyre issue whichever would be an easy check that may save unnecessary work and expense!
Thanks for the reply - I've had it up in the air and can detect no play, but I m not sure what else it would be. The sound is very metalic. I had not considered tyres so will swap them left to right and see if the noise moves to be sure.
-
Have you actually jacked the car up to find out if there is play in the bearing or are you just basing it on noise alone? Also, might not be the side you think it is due to the sound travelling across the car, (if that makes sense).
Yes there is no play but assume the bearing can be noisy first?
-
Have you actually jacked the car up to find out if there is play in the bearing or are you just basing it on noise alone? Also, might not be the side you think it is due to the sound travelling across the car, (if that makes sense).
Yes there is no play but assume the bearing can be noisy first?
In a manner of speaking, yes. Perceptible play occurs a time after noise starts :y
-
My bearing had no play at all but made a hell of a drone from the rear
(http://i35.photobucket.com/albums/d177/106pete/omega/th_78B227B2-9BFC-4E1D-91D7-257694077FC7_zpswpwagosi.jpg) (http://i35.photobucket.com/albums/d177/106pete/omega/78B227B2-9BFC-4E1D-91D7-257694077FC7_zpswpwagosi.mp4)
It's a easy job if you know what ur doin and have the right kit :y
-
Make sure your tyres are not directional before swapping :y
-
I had no play at all in mine but the bearing was dry as a nun's... It had been droning for several months and had gotten so noisy you couldn't hold a conversation without shouting!
-
My bearing had no play at all but made a hell of a drone from the rear
(http://i35.photobucket.com/albums/d177/106pete/omega/th_78B227B2-9BFC-4E1D-91D7-257694077FC7_zpswpwagosi.jpg) (http://i35.photobucket.com/albums/d177/106pete/omega/78B227B2-9BFC-4E1D-91D7-257694077FC7_zpswpwagosi.mp4)
It's a easy job if you know what ur doin and have the right kit :y
That is my problem.
-
I had no play at all in mine but the bearing was dry as a nun's... It had been droning for several months and had gotten so noisy you couldn't hold a conversation without shouting!
Good news, I've got a few weeks of life yet then :y
-
I find they last longer the louder I play the music. ::)
-
I had no play at all in mine but the bearing was dry as a nun's... It had been droning for several months and had gotten so noisy you couldn't hold a conversation without shouting!
Mine moaned like a wife for months until I could be bothered to change it.
-
Well I have the bearing now - anyone anywhere near Dorset able to help? All the local garages here seem to not really want to do it so all coming out at £300 +
???
-
Well I have the bearing now - anyone anywhere near Dorset able to help? All the local garages here seem to not really want to do it so all coming out at £300 +
???
maybe ask this member
http://www.omegaowners.com/forum/index.php?action=profile;u=17310
looks like he got tools for job :y
-
I wouldn't use him, he's a lazy git :y
-
I had no play at all in mine but the bearing was dry as a nun's... It had been droning for several months and had gotten so noisy you couldn't hold a conversation without shouting!
Mine moaned like a wife for months until I could be bothered to change it.
.
Its easier and cheaper to change a bearing,than a wife.