Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Dazzler on 24 July 2008, 21:07:46
-
I am trying to convert my 8mm fuel line to 6mm so that i can join to the tank valve and the vaporiser.
I have just been given 2 x elbows which will do this, but its no good to me as i need a straight one at both ends :(
Has anyone else had this trouble??
Do they do a straight one by chance??
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
Thanks matey :y
I will give Jeremy one more chance, if not i will get 2 of them, they look perfect :y :y
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
Thanks matey :y
I will give Jeremy one more chance, if not i will get 2 of them, they look perfect :y :y
I think Jeremy has bitten off more than he can chew... I've had a few minor problems with getting my stuff together! The tank I was supposed to collect last Friday (when they were shut but luckily Teilo was there to give me the front end) was supposed to have been delivered today (Jeremy said yesterday but I said today was fine) but when I called Jeremy to find out if I needed to hang about for a delivery he said it should arrive tomorrow but he'd check and call me back...... That was at about 11am..... Still waiting for a call!! >:( >:( >:(
That said, the kit looks fantastic and there's plenty of support there if it's needed! I'd suggest you call Teilo direct if you don't get any joy. PM me if you need his number! :y :y :y :y
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
Thanks matey :y
I will give Jeremy one more chance, if not i will get 2 of them, they look perfect :y :y
I think Jeremy has bitten off more than he can chew... I've had a few minor problems with getting my stuff together! The tank I was supposed to collect last Friday (when they were shut but luckily Teilo was there to give me the front end) was supposed to have been delivered today (Jeremy said yesterday but I said today was fine) but when I called Jeremy to find out if I needed to hang about for a delivery he said it should arrive tomorrow but he'd check and call me back...... That was at about 11am..... Still waiting for a call!! >:( >:( >:(
That said, the kit looks fantastic and there's plenty of support there if it's needed! I'd suggest you call Teilo direct if you don't get any joy. PM me if you need his number! :y :y :y :y
Ok matey ;)
Yes i have had a few problems with him >:(
Lucky for me i only live close by to him ::)
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
Thanks matey :y
I will give Jeremy one more chance, if not i will get 2 of them, they look perfect :y :y
I think Jeremy has bitten off more than he can chew... I've had a few minor problems with getting my stuff together! The tank I was supposed to collect last Friday (when they were shut but luckily Teilo was there to give me the front end) was supposed to have been delivered today (Jeremy said yesterday but I said today was fine) but when I called Jeremy to find out if I needed to hang about for a delivery he said it should arrive tomorrow but he'd check and call me back...... That was at about 11am..... Still waiting for a call!! >:( >:( >:(
That said, the kit looks fantastic and there's plenty of support there if it's needed! I'd suggest you call Teilo direct if you don't get any joy. PM me if you need his number! :y :y :y :y
Ok matey ;)
Yes i have had a few problems with him >:(
Lucky for me i only live close by to him ::)
Must confess... If I'd gone more than 20 miles out of my way last week I'd have had the right hump... Mind you, I wasn't too impressed when I dragged the Pikey Box down to that farm unit to find they were closed!! >:( >:( >:( :o :o :o
Like I said... Teilo was there luckily and fitted the filler in the rear wing and put together a front end kit for me... I'm just waiting on the tank!
As it happens, I don't think I'll get much chance to fit anything for a couple of weeks anyway due to other commitments! I'm hoping to have it running by the end of the month though! ;) ;) ;) ;)
-
My kit included a straight converter that screws into the vapouriser and takes an 8mm pipe with an olive.
Kevin
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
I have just ordered them. :y
I gave up with Jeremy trying to get what i wanted, its like bashing my head against a wall >:(
-
If all else fails... Tinley Tech do them.
http://www.tinleytech.co.uk/acatalog/Pipes_and.html
About half way down the page! :y :y :y
I have just ordered them. :y
I gave up with Jeremy trying to get what i wanted, its like bashing my head against a wall >:(
I know what you mean... Promised the tank would be here last Thursday.............Still waiting!!! >:( >:( >:( >:(
Latest promised delivery is for tomorrow, as of Tuesday. I'll believe it if it happens! ::) ::) ::) ::)
-
It's a real shame things are so hard work with Jeremy at the moment, because the kit works so well once it's complete and on the car. >:(
I'm wondering if we could find an alternative supplier. :-/
Kevin
-
It's a real shame things are so hard work with Jeremy at the moment, because the kit works so well once it's complete and on the car. >:(
I'm wondering if we could find an alternative supplier. :-/
Kevin
I wonder if we could deal direct with Teilo???? I think the majority of the problems come from a lack of communication!! :-/ :-/ :-/
-
It's a real shame things are so hard work with Jeremy at the moment, because the kit works so well once it's complete and on the car. >:(
I'm wondering if we could find an alternative supplier. :-/
Kevin
I wonder if we could deal direct with Teilo???? I think the majority of the problems come from a lack of communication!! :-/ :-/ :-/
I had assumed he and Jeremy were parts of the same organisation. Not so?
Kevin
-
It's a real shame things are so hard work with Jeremy at the moment, because the kit works so well once it's complete and on the car. >:(
I'm wondering if we could find an alternative supplier. :-/
Kevin
I wonder if we could deal direct with Teilo???? I think the majority of the problems come from a lack of communication!! :-/ :-/ :-/
I had assumed he and Jeremy were parts of the same organisation. Not so?
Kevin
Not the impression I got talking to Teilo... Perhaps I'm wrong!
-
it tok me 4 month to get a receipt out of them. i was constantly ring most weeks and their seems to be a lack of comunication between the pair of them.
i drove for 1 1/2 hrs to get my kit to find the tank wasnt there which i called in the morning to check and they said it was in so i was peved off. but the tank did arrive buy post within 4 days!
i really do think he might have bitten of a little too much!
but when i could get hold of them they couldnt be more helpful if they tried.
-
it tok me 4 month to get a receipt out of them. i was constantly ring most weeks and their seems to be a lack of comunication between the pair of them.
i drove for 1 1/2 hrs to get my kit to find the tank wasnt there which i called in the morning to check and they said it was in so i was peved off. but the tank did arrive buy post within 4 days!
i really do think he might have bitten of a little too much!
but when i could get hold of them they couldnt be more helpful if they tried.
I completely agree with that.... Just such a pain getting hold of them and getting everything together!!
-
it tok me 4 month to get a receipt out of them. i was constantly ring most weeks and their seems to be a lack of comunication between the pair of them.
i drove for 1 1/2 hrs to get my kit to find the tank wasnt there which i called in the morning to check and they said it was in so i was peved off. but the tank did arrive buy post within 4 days!
i really do think he might have bitten of a little too much!
but when i could get hold of them they couldnt be more helpful if they tried.
I completely agree with that.... Just such a pain getting hold of them and getting everything together!!
here, here.
He is a smashing bloke but will sink the company if he doesnt communicate alot better >:( :(
-
Well the new end fittings arrived today. Now thats what i call service :y
-
I am trying to convert my 8mm fuel line to 6mm so that i can join to the tank valve and the vaporiser.
I have just been given 2 x elbows which will do this, but its no good to me as i need a straight one at both ends :(
Has anyone else had this trouble??
Do they do a straight one by chance??
Just read this for the first time, and maybe showing my ignorance of LPG, I must ask can you really reduce the diameter of the pipe work without causing starvation of fuel or worse?
In the electrical and plumbing fields I know you can not restrict the flow (with electricity) of high amp supplies without causing dangerous resistence i.e. 32 amp through 2.5 cabling, and (with water) 15ml pipework will not fill a bath quickly! ;)
How can you do that with LPG without fuel starvation resulting? :-/ :-/
Maybe be a really stupid question, but I am intrigued! :-?
-
As far as I know the evaporators are only capable of taking a 6mm connection as standard, so you'll need to step it down there, whatever happens?