Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: johnyoung1966 on 10 March 2017, 18:11:05
-
Hi All,
I have joined the group for my father in law as he is beyond the power of the internet. He has an Omega 2003 which he loves, but has failed the MOT and the garage can't find the parts they need. I have the part numbers of what they are, but not sure what I am looking at. If I put them down below is the anyway you guys could help locate them, maybe you ever have them.
Brake Backing plates - 24436738 Near Side
Brake Backing plates - 24436739 Off Side
Rear suspension linkage
Part no 9057641
Bracket 9053816
Any help would be great
Thanks
John
-
most parts can get from here. http://www.vauxhall-car-parts.co.uk/acatalog/VAUXHALL_RASCAL_REAR_BRAKE_BACK_PLATE_-_Passenger_side_-_91138110.html hope this helps sorry was wrong page but i was looking on there my self
-
Brake rear plates, from memory are nls, and the other part am assuming is the rear ARB link, which are available on eBay.
-
Rear arb links on the Omega are bombproof... could mean either of the rear level sensors :-\
-
Rear arb links on the Omega are bombproof... could mean either of the rear level sensors :-\
They wouldn't fail mot.
over zealous tester, "rear drop links perished to excess"
-
If the backing plates have rotted where the hold down pins for the handbrake shoes go through then I'm sure someone did a thread on repair/bodge of this area on here some while ago?
-
Weld two washers on...
-
Weld two washers on...
Mine didn't have enough solid metal left to weld to...
...hence swapped whole subframe ;D
-
Weld two washers on...
Mine didn't have enough solid metal left to weld to...
...hence swapped whole subframe ;D
Anything for an easy life ;D
-
Thanks Guys
-
Weld two washers on...
...hence swapped whole subframe ;D
That's because us hoof'ers are a nice bunch. ;D
-
Weld two washers on...
...hence swapped whole subframe ;D
That's because us hoof'ers are a nice bunch. ;D
:y
Hoofers helping out Noofers ;D
-
Weld two washers on...
Mine didn't have enough solid metal left to weld to...
...hence swapped whole subframe ;D
Swapping the whole rear subframe for that? :o Bigger washer and some Araldite.
-
It's the water I tell you :D