Omega Owners Forum
		Omega Help Area => Omega Electrical and Audio Help => Topic started by: Elite_L0ver on 20 March 2017, 20:33:36
		
			
			- 
				Hi all been looking into this since i brought car and relised its not on it 
 
 Car is an 2003 Cd Auto Non DBW
 
 Question is is it as simple as fitting as per this guide
 
 http://www.omegaowners.com/forum/index.php?topic=90577.0
 
 Then activating in ecu
- 
				Being a Desmond, it might work straight out of the box :y
			
- 
				Being a Desmond, it might work straight out of the box :y
 
 
 Excuse my ignorance but what/who is Desmond
 
 Also you saying it should b good to go :y
- 
				Desmond...tutu...2.2.. :y
			
- 
				Desmond...tutu...2.2.. :y
 
 
 Thanks so i should get a stalk and plug in and away i go yeah ;D :D ;D
- 
				Being a Desmond, it might work straight out of the box :y
 
 
 Excuse my ignorance but what/who is Desmond
 
 Also you saying it should b good to go :y
 
 Only one way to find out ;)
 
 Worst case you get to visit Kevin Wood to get it switched on...
- 
				Being a Desmond, it might work straight out of the box :y
 
 
 Excuse my ignorance but what/who is Desmond
 
 Also you saying it should b good to go :y
 
 Andy H has asked the same question earlier today in a different topic !
 Until I read the same elsewhere a while back, I too was non the wiser.........!
 
 I have never had to retrofit a cc on an Omega as they have always had it factory fitted on mine, but on a Vectra it is just a matter of swapping the stalk for a cc stalk, and away you go....
- 
				Fitted one to mine,,,but had to have it activated ,,simple enough and worked. :y
			
- 
				It'll need activating in the ECU
			
- 
				Anyone got one laying around not being used :y
			
- 
				Buy new... indicator switch eventually wears out :y
			
- 
				Ok thanks guys could admin please lock another wonderful bunch of advice ;D :D :y
			
- 
				Mine worked straight away no programming at all. Worth fitting and trying.
 Altough since fitting it i hardly use it