Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Superleggo on 24 May 2017, 23:31:11
-
Hi
I am building a special and I am using an engine and box from an Omega. I think my engine is a 3.0 and manual gearbox but not sure as the engine number and log book(V5) do not seem to match.
The logbook shows engine no 08254289 which I guess is 2.5 ltr
But the engine is difficult to read but looks like G4 150A 78777 which I think is a 3.0ltr
Is this correct? What sort of power does it make the seller told me 210hp?
-
Can you see the block of the engine as it should have the engine code stamped on it IE x30xe or x25xe
The 3.0 does make around 210bhp
-
Yes I can see the engine very easily as it is in a rolling chassis with no body work around it. It is clean and the numbers posted are the only numbers I can see they are one the LHS in the flange by the oil filter near the gearbox. Are there other numbers I should be able to find?
-
that sounds the right location to me,this is what one I currently have in bits in my back yard says on it
Is the oil filter a spin on or cartridge type?
(https://s2.postimg.org/yz5azr2nt/P1050861.jpg)
John :y
-
Might have been a replacement new engine :-\
-
I am sure the engine is a replacement.
The oil filter is cartridge type.
I will try and photograph the engine not this weekend
-
that sounds the right location to me,this is what one I currently have in bits in my back yard says on it
Is the oil filter a spin on or cartridge type?
(https://s2.postimg.org/yz5azr2nt/P1050861.jpg)
John :y
Where exactly is that number? Have you got another photo taken from slightly further away?
I have never managed to find the number on any of mine :-\
-
The engine number reads
G4 150 A 78777
(http://i926.photobucket.com/albums/ad105/Superleggo/omega%20engine%20005.jpg)
(http://i926.photobucket.com/albums/ad105/Superleggo/General%2015th%20may%202107%20004_1.jpg)
-
don't recognise those numbers another way to check is the ident. on the camshafts
x30xe exhaust A type inlet G type
x25xe exhaust E type inlet F type
John.
-
::)
-
looks like I have beaten you guys on this engine number!
-
Right remembered today to get a couple of pics at work.
(http://i240.photobucket.com/albums/ff34/korumingus/20170601_092538.jpg) (http://s240.photobucket.com/user/korumingus/media/20170601_092538.jpg.html)
(http://i240.photobucket.com/albums/ff34/korumingus/20170601_092534.jpg) (http://s240.photobucket.com/user/korumingus/media/20170601_092534.jpg.html)
HTH
-
The engine number reads
G4 150 A 78777
(http://i926.photobucket.com/albums/ad105/Superleggo/omega%20engine%20005.jpg)
(http://i926.photobucket.com/albums/ad105/Superleggo/General%2015th%20may%202107%20004_1.jpg)
That is not a Vauxhall /GM Engine Number. That engine has been re-conditioned and that would be the number the re-conditioner would use
-
Picture of plenums might help. Short its a 25 long its a 30