Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Taxi_Driver on 17 August 2008, 19:23:10
-
But will have to see how long it lasts for :-/
First off, changed the front pads...for new ones filed down even more than Vx champer them......No difference :( Still squealed when hot.....
The old pads were only about 50% worn ......
So this afternoon........changed the rear pads, again for new ones filed down (Vx dont put a champer on the rear pads).....the old pads were only 50% worn as well.......
But the squeal has gone :y
Anyone wanna buy part used rear pads that cause squealing :-/ ;D ;D
-
erm, Ill pass cheers
-
erm, Ill pass cheers
You sure Mr Farty :-/
There in good condition, genuine Vx parts too ;)
I might be able to find a second hand cambelt and tensioners as well.......only done 42k.....yours free if you buy the brake pads :y ;D :D
-
You'll have to try harder than that.
-
Thought TB was a collector of part worn omega bits? ;D
-
You'll have to try harder than that.
My best offer is i'll throw in some furry dice :y
;D
-
my brakes squeek, think its the rears too.
Hard to do?
-
my brakes squeek, think its the rears too.
Hard to do?
File an edge on them
-
my brakes squeek, think its the rears too.
Hard to do?
Easy tunnie :y
Knock the 2 pins out....old pads levered out..how you get the pistons back is your decision.....to get the new ones in :y :-X
Gently tap the pins back in.......and your away :y :y
-
my brakes squeek, think its the rears too.
Hard to do?
Easy tunnie :y
Knock the 2 pins out....old pads levered out..how you get the pistons back is your decision.....to get the new ones in :y :-X
Gently tap the pins back in.......and your away :y :y
helps if you jack it up and remove the wheels first tho. ;D ;D
-
mr taxi driver
can you put a pic up of where to file the pads please ?, squealing is doing me head in.
cheers
lee
-
mr taxi driver
can you put a pic up of where to file the pads please ?, squealing is doing me head in.
cheers
lee
45 degree chamfeur on the leading edge of the pads ;). And copperslip on the rear of pad.
-
mr taxi driver
can you put a pic up of where to file the pads please ?, squealing is doing me head in.
cheers
lee
45 degree chamfeur on the leading edge of the pads ;). And copperslip on the rear of pad.
ahh
niceone mate, will do this week aswell as cam cover gaskets and icv.
cheers
lee