Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: addy on 09 December 2018, 10:14:22

Title: Torque values for EGR DISTRIBUTOR bracket to cylinder head
Post by: addy on 09 December 2018, 10:14:22

Would anyone know the torque values for the three bolts, that hold the bracket with the egr and distributor on, to the cylinder head?  It is for a 1995 2ltr.

The black circles in the picture show the bolts I mean.

(https://i42.photobucket.com/albums/e331/Remingtonarmy/Tempsenders.jpg)

Thanks in advance for any help.
Addy

Title: Re: Torque values for EGR DISTRIBUTOR bracket to cylinder head
Post by: Nick W on 09 December 2018, 15:57:50

They're what, M8? so finger tight and a small lean on the spanner.
Not worth worrying about.

Title: Re: Torque values for EGR DISTRIBUTOR bracket to cylinder head
Post by: TheBoy on 09 December 2018, 19:06:53

Adapter DIS ignition module to cylinder head (M8) = 20Nm
Adapter DIS ignition module to cylinder head (M10) = 30Nm

Title: Re: Torque values for EGR DISTRIBUTOR bracket to cylinder head
Post by: addy on 16 December 2018, 16:19:53

Thank you for the replies.

Addy