Omega Owners Forum

Chat Area => General Car Chat => Topic started by: omegod on 26 January 2019, 16:17:40

Title: Focus brake bleeding
Post by: omegod on 26 January 2019, 16:17:40

Howdy y'all

Having a bit of a mare here, I've completely drained the brake system on a 59 reg focus to change the axle, I've refilled it and pressure bled the system with a gunsons Ezibleed but can I buggery get a hard pedal, shoved a litre through the system and not getting any more bubbles out but still no braking  >:(

I have some software that will bleed the ABS system and am planning on trying this in the morning but any other suggestions welcome

Title: Re: Focus brake bleeding
Post by: biggriffin on 27 January 2019, 10:08:41

Check rear wheel cylinders.

Was fine till you changed rear axle, so it's something there.

Title: Re: Focus brake bleeding
Post by: omegod on 28 January 2019, 20:10:03

I did the bleed process via FORSCAN, great bit of software and it got all the air out of the abs pump, my own stupid fault for leaving the system open