Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: cwill144 on 11 November 2019, 09:05:55
-
I have just changed most of the brake pipes on my MV6 3.0L. and now need to bleed the system. when I look in the Manual it list the 3 & 4 Channel ABS bleeding sequence which are different. My car is a 98 which is when they changed, it has TC and has 4 pipes coming out of the Bosch unit but how can I tell if it is a 3 or 4 channel unit? and any tips on bleeding the system?
-
4 channel.
Start with rear, then front, and clutch if the reservoir was drained. :y
-
As mine has 4 pipes, is it the 4 channel unit?
-
As mine has 4 pipes, is it the 4 channel unit?
if you have TC, then it's 4 channel :y
(as opposed to the 3 channel that looks at both rear wheels as one :))
-
TC was available on 3 and 4 channel.
If the last LETTER of you VIN is W, its 4 channel, if its V, its 3 channel.
-
TC was available on 3 and 4 channel.
....
I stand corrected ..... :-[
-
TC was available on 3 and 4 channel.
....
I stand corrected ..... :-[
Said the man in orthopaedic shoes.
-
TC was available on 3 and 4 channel.
....
I stand corrected ..... :-[
Said the man in orthopaedic shoes.
;D ;D