Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: annihilator on 08 July 2020, 11:14:34

Title: Elite seat wiring
Post by: annihilator on 08 July 2020, 11:14:34

Using the guide in the maintenance section it says join the 2 brown wires together, I have a thick black wire (ign ?) where it shows brown in the pic.
It's a mini face lift seat.
Just trying to get the motors to fire up not bothered about anything else.
Thanks.

(https://i.postimg.cc/fyCsfJCK/IMG-20200708-110533.jpg)

Title: Re: Elite seat wiring
Post by: annihilator on 08 July 2020, 11:56:53

"in the pic" refers to the pic in the guide  :D

Title: Re: Elite seat wiring
Post by: Doctor Gollum on 08 July 2020, 16:03:29

Wire colours vary, but the pinouts in the guide are correct  :y

Title: Re: Elite seat wiring
Post by: annihilator on 09 July 2020, 15:46:50

Sorted😀 different colours same result.

(https://i.postimg.cc/7Z0txtzG/IMG-20200709-152001.jpg)

This from the old site made it clearer

(https://i.postimg.cc/1zWjTn6J/elite-seat.png)

Title: Re: Elite seat wiring
Post by: Doctor Gollum on 09 July 2020, 16:03:05

 :y