Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Marks DTM Calib on 01 September 2008, 09:22:46
-
Right, we need to plan the following jobs:
ians - Press a set of wishbone bushes (does this include remove/re-fit wishbones?)
JohnArgraig - Tech 2 work
Mick Dundee - Exhaust manifold gasket
TMX - Tech 2 work + Serpentine belt (do you mean cambelt?)
Jay W - Tech 2 work + pinion oil seal.
JamesV6Cdx - Camber set (if we can find somewhere flat!)
LFF64 - V6 Cambet, water pump and spark plugs + Tech 2 work
Dave C - Camber set (if we can find somewhere flat!)
Entwood - Pimp my ride detailing demo
johnnycboy - Tech 2 work
So, who is up for a bit of grafting?
-
Not really up to doing any of those myself (not that anyone would trust me to work on their cars ;D) except maybe gentle tech2ing :-[
Will be nosing at everything though ;D
may chuck some checkstrap washers in if anyone needs em!
-
Well I am hoping that the Captain and LooKnee might do Mick Dundees exhaust manifold so I can get the cambers set and the pinion seal done.
That then leaves Tech2 work and a cambelt or two.....
-
Well I am hoping that the Captain and LooKnee might do Mick Dundees exhaust manifold so I can get the cambers set and the pinion seal done.
That then leaves Tech2 work and a cambelt or two.....
erm you dont fancy another pinion seal do you :( mines been gently weeping for years :-[ (I know how much you love that job)
I dont mind taking the tech2 round if it helps anyone out :-/
-
Well I am hoping that the Captain and LooKnee might do Mick Dundees exhaust manifold so I can get the cambers set and the pinion seal done.
That then leaves Tech2 work and a cambelt or two.....
erm you dont fancy another pinion seal do you :( mines been gently weeping for years :-[ (I know how much you love that job)
I dont mind taking the tech2 round if it helps anyone out :-/
Have to see how we get on as far as time goes, should be able to fit it in if we get started in reasonable time. :y
-
:) whats your oil recomendation? Ill pick up a seal and bottle
-
:) whats your oil recomendation? Ill pick up a seal and bottle
Standard 80-90 hypoid is fine!
-
cool, ill be by halfords later anyway :y
-
is it a 24435952 I need to get as well?
-
I will do Dundee's exhaust manifold gasket with a little guidence from you, also don't mind doing a cam belt or two on V6's :y
Sure Captain Zok will help me :)
I will bring some tools and Cambelt Locking Kit if its needed :y
-
Ive got a new pinion seal here, its for a LSD but I think they're the same :y
-
Ive got a new pinion seal here, its for a LSD but I think they're the same :y
Cool, is the number as above? if so what ya want for it? obviously without postage ;D
-
I can do bits, not sure about manifold gasket though!
Wouldn't mind watching the pinion seal being done though, if there is room for a spare head under there?
I'm guessing the Tech2 work won't take long, we can whizz around doing them once the 'dirty' work is finished? Shouldn't take long, esp with at least 3 Tech2's onsite.
Long range forecast isn't great, some kind of large gazebo/marquee might be needed? I may have a couple of tarpalines if we need to crawl under cars, to save getting too wet if it rains...
-
Ive got a new pinion seal here, its for a LSD but I think they're the same :y
Cool, is the number as above? if so what ya want for it? obviously without postage ;D
20 minutes with the wife ;D
I'll go and check the part No ;)
-
Ive got a new pinion seal here, its for a LSD but I think they're the same :y
Cool, is the number as above? if so what ya want for it? obviously without postage ;D
20 minutes with the wife ;D
I'll go and check the part No ;)
Mine or yours ;D
-
Part No's the same ;)
Ive also got an exhaust manifold to down pipe gasket part No 24436627 which will do for Mike Dundee's exhaust ;)
-
Hope Mike as all the parts he needs, else we could get stuck :o
-
Hope Mike as all the parts he needs, else we could get stuck :o
We wont be stuck, Mike will ;D
-
Ah Poor Dundee ;D
-
Right, we need to plan the following jobs:
ians - Press a set of wishbone bushes (does this include remove/re-fit wishbones?)
So, who is up for a bit of grafting?
I'm intending to remove the wishbones from the cars this week (2 sets now.. :D) so just the bushes to deal with at Newent.
I'm happy to help on other jobs to the best of my ability.
-
i'm happy to help out where ever i can, if required i can being the following:
SP cam locking kit
Gazebo
axle stands
trolley jack
Laptop with LPG software on it
i have a few other things if anything specific is needed let me know
-
I am happy to help out as much as possible. :y
-
I'll get stuck in as needed.
Will also bring the cheapo gazebo which saw service at Keswick, (for a while anyway).
-
Yes the birthday Gnome and myself will lend a hand.
He wants to learn about Tech2 so I'm sure he will want to help one of you with that.
He's currently outside playing with his laptop and our cheapo.
Edit:- Mother's just gone out it must be bedtime.
-
Who's the 3rd man with tech 2?