Omega Owners Forum

Chat Area => General Car Chat => Topic started by: woolley11 on 12 February 2021, 20:44:29

Title: Pre facelift Omega MV6 back from bodywork
Post by: woolley11 on 12 February 2021, 20:44:29

Just got my MK1 Omega MV6 back from paint shop today.

Tidied arches, rear door shut panels and door bottoms.

20 yrs of colour Champagne hard to match but I’m pleased enough.

At 56k miles, leather, CRT700 head set and full paperwork it was worth doing 😊

Does anyone know where you can get the black arch transfers/stickers from?

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: VXL V6 on 12 February 2021, 22:27:54

If you search for 'stone chip protection film' you should be able to find some suitable film that can be cut to replace the original.  :y

Be good to see some pictures of the work completed  :)

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: Doctor Gollum on 12 February 2021, 22:46:35

Don't forget the clear strips that go further up the rear arch by the door latch ;)

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: woolley11 on 13 February 2021, 08:59:32

Thanks for those suggestions - I’ll investigate the “films”

Not sure how to put up pics on here. Other forums I’m on you can just add images off your photo library but I think I need photobucket for this forum 🤷🏼‍♂️

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: cam.in.head on 13 February 2021, 09:39:17

The Carlton mk3 models had a similar looking strip and you could buy it from the dealers as a proper piece. Same as the omega no doubt if someone has a part number or you can buy rolls or sheets of self adhesive vinyl and cut to chape.
Or if you are neat with the masking tape you could use the black textured thick spray paint designed for plastic bumpers ?

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: Migv6 le Frog Fan on 13 February 2021, 13:31:25

Quote from: woolley11 on 13 February 2021, 08:59:32

Thanks for those suggestions - I’ll investigate the “films”

Not sure how to put up pics on here. Other forums I’m on you can just add images off your photo library but I think I need photobucket for this forum 🤷🏼‍♂️

Need to use a hosting site to upload pics from. I use Postimage.

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: woolley11 on 13 February 2021, 13:47:11

If someone pm with an email address I can send them to the member for then to put up

Might be easier for me as I’m not the sharpest knife in the box with IT 😄

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: Doctor Gollum on 13 February 2021, 16:27:15

Stone chip protection (the black strip):

90511361 Right hand
90511360 Left hand

Protective foil (the clear strip):

24423007 Right hand
24423006 Left hand

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: Nick W on 13 February 2021, 16:46:44

Quote from: woolley11 on 13 February 2021, 08:59:32

Thanks for those suggestions - I’ll investigate the “films”

Not sure how to put up pics on here. Other forums I’m on you can just add images off your photo library but I think I need photobucket for this forum 🤷🏼‍♂️

I've most of a large sheet of 'carbon fibre' vinyl wrap that's going spare. It won't look too out of place, and if you figure out how much(little ::) ) you'll need I'll send you some. PM me.

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: woolley11 on 13 February 2021, 20:44:08

Thanks

Are those part numbers current ? I could try Vauxhall next week

Doubt they’ll be listed though 🤔

I’ll get some measurements of what I need 👍

Title: Re: Pre facelift Omega MV6 back from bodywork
Post by: Doctor Gollum on 13 February 2021, 21:18:45

Apparently one of the foils is NLS but you never know :y

The part numbers are the most current I could find, but should link forward if they have subsequently changed  ;)