Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: countrywoman on 12 April 2021, 09:18:21

Title: abs pipes
Post by: countrywoman on 12 April 2021, 09:18:21
Lost the sheet of paper with the order for ABS pipes, I know the large fitting on unit goes to small fitting on m/cyl but not the rest. 5 port ? ABS unit 96 P reg. There is letters in the casting on pump if that helps.
Title: Re: abs pipes
Post by: countrywoman on 13 April 2021, 09:22:25
Any one ?
Title: Re: abs pipes
Post by: henryd on 13 April 2021, 10:19:03
https://www.ebay.co.uk/itm/90538655-abs-opel-omega-b-672848/114288486962?_trkparms=aid%3D1110018%26algo%3DHOMESPLICE.COMPLISTINGS%26ao%3D1%26asc%3D20201210111452%26meid%3Db1e2198e59e34bd68d0525e32cc38d70%26pid%3D101196%26rk%3D1%26rkt%3D12%26mehot%3Dpf%26sd%3D133670367662%26itm%3D114288486962%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DItemStripV101HighAdFeeWithCompV3Ranker%26brand%3DOpel&_trksid=p2047675.c101196.m2219

the letters are where the pipes belong but probably in german  ,front is Vorderseite according to google translate
Title: Re: abs pipes
Post by: henryd on 13 April 2021, 10:21:48
https://www.mye28.com/viewtopic.php?t=67364

Bosch unit on a BMW but should be same,they are talking about a left hand drive car though !!

Vor  front
Hinten    rear
Title: Re: abs pipes
Post by: Enceladus on 13 April 2021, 12:07:42
https://www.mye28.com/viewtopic.php?t=67364

Bosch unit on a BMW but should be same,they are talking about a left hand drive car though !!

Vor  front
Hinten    rear
Yes exactly, car in Philadelphia USA, so LHD.
R=Rechts=Right=Offside and L=Links=Left=Nearside.
So HR=Hinten Rechts=Rear Offside. And VR=Vor(derseite)=Front Offside. And so on.

If your ports are not labelled but the pattern is the same as the ebay photo then I would imagine it's the same pattern. Unless somebody can confirm otherwise?
Title: Re: abs pipes
Post by: Doctor Gollum on 13 April 2021, 12:24:36
Offside/Nearside whilst ok for UK use, muddies the water somewhat for elsewhere.

V(orne) L(inks) = Front Left
V(orne) R(echts) = Front Right
H(inter) L(inks) = Rear Left
H(inter) R(echts) = Rear Right

Any other letters will give reference to those pipes, but would expect channel 1 and channel 2 from the master for the dual circuit system. Should also be a pressure switch on the valve block (unless it's internal on these).

Title: Re: abs pipes
Post by: countrywoman on 14 April 2021, 09:24:25
Thanks will look and see what letters are on unit today.
Title: Re: abs pipes
Post by: countrywoman on 17 April 2021, 09:36:13
 well dears it says across the top nothing on large union, I on next one a cast in small h on next then the 2 on front face V stamped in on one and H in the other and can only find 5 ports .
Title: Re: abs pipes
Post by: Enceladus on 17 April 2021, 11:54:12
Some pictures might help.
Is the donor a P reg V6?  In which case should be a 3 channel ABS.
Title: Re: abs pipes
Post by: countrywoman on 17 April 2021, 19:45:29
Yup P reg v6 .
Title: Re: abs pipes
Post by: countrywoman on 20 April 2021, 21:02:23
So any one know the pipe order on a 3 channel ABS pump?
Title: Re: abs pipes
Post by: Enceladus on 21 April 2021, 05:20:59
I would expect that there is one port feeding both rear brakes. I expect 'H' in your case. Trouble is what does the lower case 'h' port feed?

The front brakes should be VL and VR, but yours aren't.

Some pics might be useful?
Title: Re: abs pipes
Post by: countrywoman on 21 April 2021, 09:00:52
Yes will do , need to remove it as its in place while I have been working out placement of stuff
Title: Re: abs pipes
Post by: countrywoman on 23 April 2021, 21:12:00
Well I took pics, Imger wont upload . Will keep trying.