Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: VXL V6 on 26 June 2021, 15:47:57

Title: Irmscher bumper - Park sensors
Post by: VXL V6 on 26 June 2021, 15:47:57

Does anyone have any documentation or decent resolution pictures of where to drill the park sensor holes in an Irmscher Saloon bumper?

I can hold it up against a standard bumper if not but thought i'd ask here first  :y

Title: Re: Irmscher bumper - Park sensors
Post by: annihilator on 26 June 2021, 16:47:03

May help

(https://i.postimg.cc/Ls5j732T/OPEL-OMEGA-01.jpg)

Title: Re: Irmscher bumper - Park sensors
Post by: VXL V6 on 26 June 2021, 17:06:55

Pilot holes now drilled, got to find a spare sensor housing now to drill the right size hole  :y

Title: Re: Irmscher bumper - Park sensors
Post by: Doctor Gollum on 26 June 2021, 19:54:26

Pop a sensor out of the daily ::)

Title: Re: Irmscher bumper - Park sensors
Post by: VXL V6 on 26 June 2021, 21:13:15

Had to order a new hole cutter as mine is too small.  ::)

Got a full set of sensors in a box somewhere so will seek them out for trial fitting  :y

Title: Re: Irmscher bumper - Park sensors
Post by: VXL V6 on 29 June 2021, 17:32:15

New hole cutter arrived and holes drilled, trial fitted with spare Parkpilot kit I have.

Al did do a guide for the correct locations  :y https://www.omegaowners.com/forum/index.php?topic=132545.msg1698121#msg1698121

Title: Re: Irmscher bumper - Park sensors
Post by: Doctor Gollum on 29 June 2021, 18:30:53

Quote from: VXL V6 on 29 June 2021, 17:32:15

New hole cutter arrived and holes drilled, trial fitted with spare Parkpilot kit I have.

Al did do a guide for the correct locations  :y https://www.omegaowners.com/forum/index.php?topic=132545.msg1698121#msg1698121

So I did ;D

 :y