Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GastronomicKleptomaniac on 04 March 2022, 21:28:57

Title: 3.2 big end bearings - where from?
Post by: GastronomicKleptomaniac on 04 March 2022, 21:28:57

Getting ready to strip the engine fully. I've been advised that it will probably need a set of bottom end bearings... But where would I get them from? Everywhere online seems to A-direct to Autodoc and B - be out of stock.

I'd like to prepare myself if it does need them rather than furiously Googling with oily mitts... :y

Title: Re: 3.2 big end bearings - where from?
Post by: Migalot on 04 March 2022, 21:38:23

Don't know the full details of your car, but is this what you are looking for?  ???

%20MM&utm_term=4579878251292057&utm_content=PL%20-%20%20engine%20parts%20&%20crankshaft%20drive%20MM]https://www.gsfcarparts.com/162vg0015?auto_apply_coupon=SHOP60&msclkid=47403b43275e109ff5595961a150b320&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20Engine%20Parts%20[Manual]%20MM&utm_term=4579878251292057&utm_content=PL%20-%20%20engine%20parts%20&%20crankshaft%20drive%20MM (https://www.gsfcarparts.com/162vg0015?auto_apply_coupon=SHOP60&msclkid=47403b43275e109ff5595961a150b320&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20Engine%20Parts%20[Manual)

Title: Re: 3.2 big end bearings - where from?
Post by: Doctor Gollum on 04 March 2022, 21:39:07

Look west ;)

GM or someone such as Summit Racing...

Title: Re: 3.2 big end bearings - where from?
Post by: Nick W on 04 March 2022, 22:07:26

Find your local engine machine shop(it might not be very local!) and ask them. They will be dealing directly with the  suppliers for such things. You'll be needing them to machine the crank if the bearings are really bad.

Title: Re: 3.2 big end bearings - where from?
Post by: GastronomicKleptomaniac on 05 March 2022, 07:40:49

Spot on, thanks gents!

Just invested in an engine stand made of finest Chinesium so will bave a proper look :y