Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GastronomicKleptomaniac on 01 June 2022, 12:14:51

Title: Rear ABS sensor wiring
Post by: GastronomicKleptomaniac on 01 June 2022, 12:14:51

Imagine a world... where a northern idiot is rebuilding an old Omega.

Now imagine he's putting the diff back in, with the ABS sensors.

And now imagine he didn't tag the cables (on the car) for which side was which. I've left the sensors and wiring in the diff and at least I've managed to put that in the right way round...

Accepting he'd be a monumental bellend for doing this... help would be appreciated. One cable is shorter than the other so the plug sits to the nearside of the car by an inch or so.

Note to self - next time take a lot more photos.

Title: Re: Rear ABS sensor wiring
Post by: Doctor Gollum on 01 June 2022, 17:00:05

Haynes wiring diagrams might help identify the plugs ;)

Title: Re: Rear ABS sensor wiring
Post by: GastronomicKleptomaniac on 01 June 2022, 17:16:09

That would mean having the diagrams. And reading them. I mean, you don't buy a dog and bark yourself ;)

Title: Re: Rear ABS sensor wiring
Post by: Stu.C on 01 June 2022, 18:02:43

Woof  :y


(https://www.cuyahoga.co.uk/wp-content/uploads/2022/06/Screenshot-2022-06-01-175655.png)


P19 Wheel sensor - rear left
P20 Wheel sensor - rear right


(https://www.cuyahoga.co.uk/wp-content/uploads/2022/06/IMG_0357-scaled-e1654102890276.jpg)




* Obvious caveat : this was on a 3.0 E&OE  ;)

Title: Re: Rear ABS sensor wiring
Post by: GastronomicKleptomaniac on 01 June 2022, 18:16:56

You're a gentleman, thank you :D :D