Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Migalot on 19 February 2023, 11:18:50
-
Since I'm not ready to crawl under the car yet, I thought I'd check the wiring from the O2 sensor connection to the ECU to see if a wire has been crimped. So, from the passenger side (Bank 2, Sensor 1) where does the cable route? Into the car's passenger footwell and along to the ECU on the driver's side (?) or in the engine compartment forward of the bulk and across?
Hope that makes sense!
-
Along the gearbox, up over the bellhousing and into the engine loom ;)
Plugs are either side of the gearbox. And it has four sensors.
-
Along the gearbox, up over the bellhousing and into the engine loom ;)
Plugs are either side of the gearbox. And it has four sensors.
:y