Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: polilara on 03 July 2023, 17:15:20

Title: Plenum to Intake Bridge Torque?
Post by: polilara on 03 July 2023, 17:15:20

Didn't find it here, guess it's 20Nm. Usually I overtight everythng...

https://www.omegaowners.com/forum/index.php?topic=90519.0

Title: Re: Plenum to Intake Bridge Torque?
Post by: Enceladus on 03 July 2023, 19:37:28

Aren't the screws securing the plenum only 8Nm?

Title: Re: Plenum to Intake Bridge Torque?
Post by: dave the builder on 03 July 2023, 21:39:15

I don't know what the official Nm figure is  :-[ but with the O-rings between the surfaces ,I'd imagine "hand tight " 10 to 15 Nm  :-\

Title: Re: Plenum to Intake Bridge Torque?
Post by: Migv6 le Frog Fan on 03 July 2023, 22:36:35

I have a feeling its either 8nm or 12nm but cant remember which.
Im at work so cant pop out to the shed and Please read the manual.  :)

Title: Re: Plenum to Intake Bridge Torque?
Post by: YZ250 on 04 July 2023, 10:37:14

Taken from Haynes Manual, Nm on the left and lbs/ft on the right. Oops, sorry about photo size.   ::)
I have highlighted the Upper section with an arrow, listed as 8Nm

(https://i.ibb.co/djmtc4F/IMG-1841.jpg)

Title: Re: Plenum to Intake Bridge Torque?
Post by: polilara on 05 July 2023, 15:26:31

Thanks, 8Nm,  not very high value.