Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Duke01 on 20 August 2023, 14:00:22

Title: Still wont start.
Post by: Duke01 on 20 August 2023, 14:00:22

So after replacing the starter, and it started fine,
I had a fault code of PO758, shift solenoid
Cleared code and she ran fine. Then the shifter starting acting up, all lights lit up and went in to limp mode.

Now the car wont start at all! as in wont crank, again, So back to square one.

Any ideas?

Title: Re: Still wont start.
Post by: Doctor Gollum on 20 August 2023, 14:33:38

You need to follow the selector plate repair guide.

Title: Re: Still wont start.
Post by: TheBoy on 20 August 2023, 18:08:36

Yup, sort out the range switch (aka selector switch)

Title: Re: Still wont start.
Post by: biggriffin on 20 August 2023, 18:53:17

A bit of searching in the handy named maintenance section turns this up
https://www.omegaowners.com/forum/index.php?topic=90673.0