Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Mutha Jugs n Speed on 11 December 2025, 17:04:31
-
This question is for one of my 3.2's. Lumpy tick over, EML on, so with the help of Dr G, the dodgy ECU was swapped from the other 3.2 and vice versa to confirm that a fault is present PO150, O2 sensor had been changed with a new Bosch sensor before the ECU change around. So currently running the 3.2 on a 2.6 ECU and running great...but I've been trying to get the faulty ECU repaired,and have sent it to a couple of companies, who big themselves up, but can't help. So is there any one here that may have had a positive result recently for an engine ECU repair? Also there ::) are a couple of used ones on ebay, but minus the chip and transponder ring, so basically £150's worth of door stop!
-
I’ve used AP-Reman and www.ecutesting.com, both with success, but for ABS Pump module repairs, not engine ECU.
As these two pop up in a search, I’m guessing that maybe you’ve enquired with these already though. :-\
-
Thanks for the heads up, I haven't tried this company, but will fill in their online request form, and see where we go with it. Apparently it's been suggested that I send the ECU directly to Bosch in Germany, but that comes with the risk of it going missing in their system/ language probs. If only the people that are breaking the cars do the job correctly, and remove the relevant parts >:(