Omega Owners Forum
Trading Area => Cars for Sale & wanted => Topic started by: VXL V6 on 23 December 2025, 21:04:18
-
For Sale - Spares and Repairs
2002 Omega 3.2 Elite Saloon Automatic
Z20R Black
Leather interior
NCDC2013 & CID
149800 Miles
Good Points
Cambelt kit Jan 2024 @ 140K
Auxbelt Jan 2024 @ 140K
Spark Plugs Jan 2024 @ 140K
Rear arches professionally repaired and painted
MV6 Prodrive front bumper
One off Silver trim
Bad Points
Not currently MOT'd - would need to be trailered away
O/S Inner Wing has rusted through where it meets the Chassis rail. Definite MOT fail
O/S Outer Wing has lacquer peel
HBV has slight leak, was replaced but part was old stock
Rear shocks misting
Feels as if rear wishbone bushes are worn, front is polybushed
Suspension is Eibach and Bilston B4's but is now on 50K
Front tyres will need replacing soon
Car has been sitting for about 3 months.
General
Original restoration thread here - https://www.omegaowners.com/forum/index.php?topic=143044.0 (https://www.omegaowners.com/forum/index.php?topic=143044.0)
Some current Photo's here - https://ibb.co/album/GWtfwh (https://ibb.co/album/GWtfwh)
Price
Offers over £500
Collection of car would be from Stratford Upon Avon area (J15 M40 closest Motorway)
-
Seems a shame having to give up with the car at this point. Have you costed the welding/repair,? as most of the other bits and pieces are fairly easy to deal with :-\
-
This exactly. Sounds like not very much needed to turn it into a nice car again, and there are very few of them left.
If it was " around the corner" I would probably be unable to resist the temptation, but it isnt, so I can.
-
Front inner wings can be patched to a point using decent marine grade epoxy/woven fabric. :-X
-
Probably easier to just weld it and do the job properly. ;)
-
Probably easier to just weld it and do the job properly. ;)
Yes and no... There's alot to remove to clear the top edge of the chassis legs so as not melt the wiring, especially on the left... Either method would probably last as long as the car. ;)
-
It aint right though. Its a bodge, and I couldnt live with that. :)
-
It aint right though. Its a bodge, and I couldnt live with that. :)
Well, it's a (marginal) improvement on a Tunnie-esque gaffer tape bodge....
-
Yeah but, Tunnie. ::) ;D
-
Now Sold, please lock thread. :y